make weed pills

How To Make THC Pills: A Step-by-Step Guide

THC pills can provide a convenient and discreet option for enjoying the cannabinoid. But if they’re not available where you live or if you’d like to avoid paying high prices and taxes at a dispensary, can you learn how to make weed pills at home? Turns out, you can.

What Are THC Pills?

A separate High Times guide gives the full rundown on just what THC pills are. But as a quick review, THC pills are a capsule filled with some type of cannabis product, often mixed with oil to improve the body’s absorption of the cannabinoids. They are an odorless, smokeless, and convenient way to ingest cannabis.

How To Make THC Capsules

The simplest how to make weed pills method is to mix finely ground cannabis flower with vegetable oil to make a paste. But this method produces low-potency pills that are not likely to last as long as those without remaining plant material. It’s also not easy to get the paste into the empty capsules.

A better way of how to make THC capsules is to extract your cannabis product into an oil base.

Before you begin, assemble your materials and supplies. Besides your choice of cannabis product, you’ll need some sort of vegetable oil. Just about any oil will work — medium chain triglyceride (MCT) coconut oil is an increasingly popular choice for commercial cannabis capsule manufacturers.

You’ll also need empty gelatin or vegetarian capsules. A special tray to hold the capsules and a syringe to fill them make the process easier.

How to Make THC Pills Step 1: Choose Your Cannabis

Just about any flower, kief, or extract can be used when you are learning how to make weed pills. The trim left over from harvesting and manicuring buds is also commonly used. What you choose might depend on what you have available or what fits your budget. The more potent the material you use, the more potent your canna oil will be.

How to Make THC Pills Step 2: Decarb Your Cannabis (or not)

If you want to know how to make THC capsules, there is a good chance you’re expecting a buzz from your pills. If that’s the case, you’ll want to decarboxylate your cannabis product first. This important step in how to make weed pills converts the non-psychoactive THCA into THC.

Tetrahydrocannabinolic acid, or THCA, is the form of THC that is most prevalent in live or fresh cannabis plants. As plant material dries, THCA converts to THC naturally, but very slowly. This process is known as decarboxylation, or decarbing in the parlance of pot. Heating, burning, or vaporizing a cannabis product speeds up this process greatly.

THCA is not psychoactive, so if you want a buzz from your weed pills, decarboxylate it first. This is done by gently heating the cannabis at about 220 degrees Fahrenheit for about 45 minutes.

However, if you don’t want to get high with your weed pills, skip this step. THCA can still help reduce pain, inflammation, and nausea and may also have neuroprotective qualities, all without the buzz.

How to Make THC Pills Step 3: Prepare Your Cannabis

The next step in the process of how to make weed pills is to make the cannabis oil that you will use to fill your capsules. You can use a crock pot, mason jars, or other recipe and method you prefer.

In this step, you will be extracting the THC and other cannabinoids from your cannabis product, as well as any terpenes and flavonoids that might be present. If you are using a concentrate or kief, you are likely to produce a very potent canna oil. Proceed with caution when determining dosage.

Once you’ve created your canna oil, you can determine the potency of it using a simple and inexpensive device at home, if desired. Then by measuring how much oil you put in each capsule, you’ll be able to calculate the dose per pill.

How to Make THC Pills Step 4: Fill Your Capsules

Once you have made the canna oil of your choice, the next step in how to make THC capsules is filling your capsules. Separate the two pieces, setting the caps aside. Place the other half of the capsules in the filling tray, if you have one.

Using a syringe or large dropper, fill each of the capsules with the canna oil. If you’re using coconut oil, putting the tray in the freezer for a few minutes will solidify your oil and make it easier to put the tops on the capsules. Adding this step to how to make THC capsules will help prevent spilling the canna oil.

Next, carefully recap the capsules. Store them in the refrigerator or freezer to keep them fresh.

How to Make THC Pills Step 5: Enjoy Your Weed Capsules

Now that you know how to make weed pills, it’s time to enjoy their medicinal and recreational benefits. Be sure to try them at home the first time, when you don’t have anywhere to be or anything important to accomplish. You’ll want to know how they affect you before you attempt to mix them with other activities, which should not include driving or operating machinery. Enjoy!

THC pills offer a convenient and discreet way to medicate on-the-go.

How You Can Make Your Own Cannabis-Filled Capsules

Cannabis capsules are an easy, discreet, and super-effective way to medicate. Taking a pill blends more seamlessly into most people’s daily routine than smoking, vaporizing, or eating an edible.

Making cannabis capsules at home is a simple way to ensure you’re ingesting medicine that suits your individual needs.

Low-dose of cannabinoids daily can help ease a variety of ailments, and when you’re treating a chronic disorder it’s important to consistently flood your body with healing cannabinoids.

There are two routes to take when making your own capsules — infused oil or decarboxylated dry cannabis flower .

Some prefer to have an oil base because raw cannabis can be slightly harder for sensitive stomachs to digest. But if you’re looking for speed and ease, raw decarboxylated flower is the way to go and it’s just as effective.

To determine the potency, let’s do some quick math

We will be using “0” size capsules that can hold approximately 500 milligrams .

For calculating the decarbed flower capsules, we’re going to assume the material used is approximately 5 percent THC by weight. This means there is 50 mg of THC for each 1 gram of plant material. Each pill capsule holds about 0.5 gram of plant material, which is approximately 5 mg of activated THC. By those calculations, each decarbed flower capsule will contain approximately 5 mg of THC.

For the oil-based capsules, you can adjust the potency based on how much cannabis you infuse into the oil. I’ve laid out two options below. If you’d like a stronger pill, simply infuse more flower in the oil. As mentioned above, a size 0 capsule will hold about 500 milligrams, but the aim is to fill the capsule to about 80 percent of its capacity, or 400 milligrams for dry flower. The equivalent fluid weight is 400 milliliters.

For the sake of consistency, we will assume that the average gram of cannabis contains 50 mg of THC.

7 grams of cannabis into ¼ cup oil: (7 grams x 50mg THC = 350mg of THC) *¼ cup = 59.1 mL

— 350mg divided by 59.1 mL = 5.9 mg per mL

— 5.9 mg THC per mL x 0.4 mL (per capsule) = 2.36 mg THC

14 grams of cannabis into ¼ cup oil: (14 grams x 50mg THC = 700mg of THC) *¼ cup = 59.1 mL

— 700mg divided by 59.1 mL = 11.8 mg per mL

— 11.8 mg THC per mL x 0.4 mL (per capsule) = 4.72 mg THC

If you’d like a capsule with an infused-oil base, begin by making cannabis-infused oil — follow these recipes to make homemade oil with coconut oil or olive oil .

If you’d like raw herbs, begin by preheating your oven to 220 degrees Fahrenheit, or about 105 degrees Celsius. While the oven is preheating, grind up your cannabis finely with an herb grinder , coffee grinder, or mortar and pestle. Cover a baking sheet with parchment paper and spread your cannabis crumble evenly on top. Bake for about 60 minutes, making sure the oven doesn’t rise above 250 degrees Fahrenheit, or 121 degrees Celsius.

If you’re looking for an extra punch of herbal healing in either recipe, try adding some of the following herbs into the canna-oil or simply mix them with your post-decarbed cannabis powder:

  • For calming sleep capsules, add powdered valerian root, skullcap, lemon balm, or hop flower.
  • For nutritious superfood capsules, add spirulina, chlorella, or turmeric.
  • For energizing daytime capsules, add gingko root, astragalus, or maca root.

After the cannabis is decarbed or the oil is infused, it’s time to fill the capsules. Using a capsule machine shortens this process to 5 minutes or less, but it’s possible to fill them without one. I would definitely recommend a machine; they are less than $20 and save a lot of money in the long run if you consistently make a variety of herbal capsules.

Begin by separating the tops and bottoms of the capsules; the bottoms are the slightly larger of the two sides. Place the bottom half of the capsules in the base of the capsule machine.

If you chose the dry-herb capsules, pour your herbal mixture into the pill maker. You can do straight cannabis, but I decided to mix some valerian root and nettle into mine for that extra nutritious oomph.

Use a card to evenly spread the herbs across the capsule openings. Use the tamping tool included with the capsule kit to gently press the herbs down, and add some more if there’s room. Fill the lid of the capsule machine with the capsule tops and place on the device. Remove the machine from its stand and press down with both hands until the capsules are joined together. Lift, remove the filled capsules, and voila!

If you chose the oil-based capsules, use a syringe or dropper to carefully fill the bottoms of the capsules.

(Note: if you’re using coconut oil, it needs to be warmed in order to remain viscous to make the filling process easier. However, if the oil is too warm it can melt the capsules, so it’s important to stay in that neutral temperature zone).

Once the capsules are filled, place the tops of the capsules into the lid of the machine and place on the device. Move the machine off its stand and press down on the top of the machine with both hands. Lift, remove the filled capsules, and you have some golden cannabis capsules!

How You Can Make Your Own Cannabis-Filled Capsules Cannabis capsules are an easy, discreet, and super-effective way to medicate. Taking a pill blends more seamlessly into most people’s daily