hydraulic press weed

How to use a Hydraulic Rosin Press

Rosin has become a hugely popular extraction method, not only because it’s really easy to carry out and completely safe, with no risk of explosions or fire, but also because of the purity of the results, giving clean cannabis concentrates produced using only heat and pressure, totally free of solvents, and within the reach of everyone.

Simple, clean and safe, rosin is the perfect extraction method for the home grower

With this growth in popularity, the number of purpose-built presses on the market has increased hugely over the last year, with a wide range of different sizes, styles and prices available to the budding extractor, depending on his or her requirements.

In posts over the last few years we’ve shown you how to make rosin from flowers and then from hash using a simple electric hair straightener, a great and inexpensive way to get started in this world of solventless cannabis extractions. But now it’s time to look at how to extract on a larger scale, using a hydraulic press and heated aluminium plates.

The principals of the extraction process are the same, as are the variables to control: temperature, pressure and time. However, things are a bit easier in the case of a professional press, we’ve got more pressure at our disposal, the temperature of the plates should be more accurate and reliable, and we’ll also have larger plates with greater surface area, meaning we can press more each time. If you’ve ever pressed an ounce of flower with a hair iron, squishing 1 gram at a time, you’ll know what I mean! With a good rosin press we can comfortably press an ounce of flowers (or more) in one go!

The Rosin technique

When we press rosin, the idea is to get as much resin out of the starting material as quickly as we can, and at as low a temperature as possible. This is because heat naturally reduces quality, evaporating volatile terpenes and oxidising cannabinoids. We should be aiming to extract all of the rosin in the first press, rather than having to repress the material for a second time, with inevitably leads to a decrease in quality, producing darker coloured resin with a lower content in terpenes.

For this reason it’s well worth taking notes for each strain processed and performing a few test presses on the material to “dial in” the temperature and timing variables for maximum efficiency in the extraction, and to find the perfect balance between yield and quality. Pressing at high temperatures will extract more oil, but of a lower quality as the heat evaporates terpenes and increases oxidisation, whereas pressing at a low temperature will extract a lesser quantity of more highly-flavoured resin extract, giving slightly lower yields in favour of superior quality.

Rosin: from flowers to clean concentrates in just a few minutes

Preparing the material to make Rosin

The decisive factor in a successful Rosin extraction is the quality of the starting material, we should use only the best material we have if we want a top shelf concentrate at the end of the day. As with many processes, preparation of this high grade material is key to success and shouldn’t be rushed. Taking the extra time to properly prepare before pressing will be rewarded with consistently superior results.

The first step in preparation is proper storage, and to optimise quality, the material, whether it’s flowers or hash, should be preserved in airtight containers at a low temperature and protected from light. In the case of flowers, maintaining the correct humidity is vital, so many extractors use Boveda humidor packs to keep the buds at 62% RH, the perfect humidity level for making rosin. The packs can be re-used many times and are essential for anyone serious about making flower rosin. When pressing rosin from hash however, humidity is less crucial, although it’s just as important to store the hash properly before pressing to preserve the terpenes and cannabinoids from unnecessary degradation.

Filling the Rosin filter bags

Mesh bag filled with resinous buds

So, now we’ve got the material in optimum condition, next it’s time to load the rosin bags. These are mesh bags available in different sizes according to the measurements of the heated plates being used and in different mesh sizes, depending on the application needed. They serve to contain the starting material being pressed, while allowing the clean, uncontaminated rosin to seep out through the tiny holes measuring between 25 and 220 microns. For pressing flowers we recommend a mesh size of between 73 and 220 microns, and for hash it’s best to use a mesh from 25 to 45 microns in size.

To prepare the buds for stuffing into the bags, first break them up and remove any non-resinous leaves and as much of the stem as possible. Not only could the stems damage the filter bag, perforating it under pressure, but any surplus, trichome-free vegetable matter will only serve to absorb the liquid resin once it heats up, thereby reducing our yield.

There are two ways to fill the mesh bag with flowers, depending on how much material we’re processing. If you’re going to be using the press for regular production we highly recommend using a pre-press mould, which enables us to quickly and easily compress the flowers into a firm, solid brick that’s the perfect size to slip inside the mesh bag, saving time and effort. In a perfect setup, the pre-press process would be performed using a small 1 ton arbor press or a Quick-Clamp type of hand clamp, but failing that, we can use our own body weight, stepping on the pre-press with the heel of a shoe. Remember to line the inside faces of the pre-press device with parchment so the compressed flowers won’t stick.

Using a pre-press mould to compress the flowers

If not using a pre-press mould, we can fill the bag by hand. This way will take longer and we’ll only be able to fit about half as much flower in each bag, but the quality and return are comparable using either method. When filling by hand it’s crucial to leave as little empty space as possible between the buds inside the bag, so break them into smaller chunks to fill the corners and edges, compacting each layer by hand as we progressively fill the bag, remembering to leave enough empty bag at the top to allow us to fold it over to close it.

While a pre-press mould may be useful, it won’t be absolutely necessary when working with bubble hash or dry sift, simply fill the 25 – 45 micron bag with your chosen resin, making sure all the corners are filled properly, then press the filled bag lightly by hand to flatten it before squishing.

At this point we strongly recommend placing the filled 25-45 micron bag inside another rosin bag of larger mesh size, from 160 to 220 microns, this serves to add a more rigid layer of reinforcement around the bag and helps to prevent the dreaded “blow-out” (more about that a bit later)

In the case of preparing multiple bags for batch pressing, we can store the filled mesh bags with a boveda pack inside a jar, container or plastic bag until we’re ready to press. This ensures that all bags remain at optimum humidity levels, helping us to achieve consistent results when pressing. If you’re working on a hot day, keep the filled bags in the fridge too.

Preparing parchment paper to collect Rosin

Rosin is always pressed using non-stick parchment paper, which as well as making it easy to recuperate the resin once the extraction is done, also keeps the heated plates clean and free from sticky residue, saving maintenance work.

Parchment folded in the “Burrito-tech” style

Pressing rosin can be as simple as placing the filled mesh bag between two sheets of parchment, applying pressure, and allowing the resin to seep out of all four sides of the bag onto the paper. The disadvantage here is that some of the rosin, once it seeps out of the mesh bag, will still stay in contact with the heated plates and will lose quality as a result.

To avoid this we can fold the parchment in a way that expels the rosin from the front side only, taking it away from the heat. Sometimes referred to as “Burrito-tech” as it resembles a folded tortilla closed on three sides, this technique gives us more control, allowing a much better view of the extraction, which enables us to see the resin begin to flow, and then observe when it slows at the end of the process.

Setting up the Rosin press

If you’re using a table-top press, make sure you place it on a sturdy desk or table at a comfortable height for working, ideally with the plates situated at eye-level for comfort. A free-standing press will need a flat, level floor that’s sturdy enough to take the weight, which can be considerable.

Gorilla 20 ton Hydraulic Rosin Press

Once you’re happy the press is safely installed, you can plug in the heaters and set the desired temperature for the plates. Some models have dual controls, allowing you to set each plate at a different temperature, while others only have one controller to set the same temperature on both plates, which in our experience is works perfectly well and keeps things nice and simple.

Pressing temperatures to make Rosin

The correct temperature to press at will depend on a variety of factors, taking into account the type of material – hash or flowers, and the quality, age and condition of said material, and even the relative humidity and temperature of the space in which we’re working. Each variety, phenotype and batch will be slightly different, but as a general rule when pressing older, dryer flowers, we’ll will need to use slightly higher temperatures for a satisfactory extraction, while relatively fresh material can be processed using less heat, thus preserving the greatest amount of terpenes possible. The same goes for making rosin from bubble hash or dry sift: the better the quality of the starting material, the lower the temperature we can use.

Temperature controller display

We recommend pressing in a range from 85ºC to a maximum of 110ºC for flowers, and to set the heaters to a temperature between 65ºC and 105ºC when pressing hash, depending on the quality of the starting material.

Using these guide temperatures as a starting point, you can experiment to find the perfect balance between high returns and optimum quality, always remembering what we’ve stated above: that each batch of each strain can behave in a slightly different way and that ambiental factors can also impact on pressing temperatures.

If desired, we can verify the temperature of the plates using a contact thermometer or a digital thermometer with a leaf probe. Infra-red/laser thermometers won’t be able to give an accurate reading as they don’t work properly on reflective surfaces. In any case, the press should be fitted with a perfectly accurate thermocouple which, if fitted properly, will provide us with the true temperature of the plates and allow the controller to adjust the heat automatically.

Squishing some Rosin

Bag and envelope in place, ready to start pressing

The press shouldn’t take more than a few minutes to heat up to the desired temperature, and with the filled mesh bag in the parchment pouch we prepared earlier, we can begin the extraction process.

Place the bag and parchment centrally between the heated plates, making sure all parts of the mesh bag are within the surface area of the plates. When we’re satisfied with the position we can start to close the plates until they begin to apply slight pressure, just making contact with the bag and squeezing it ever so slightly, then stopping to wait a moment before continuing. This short period of pre-heating the material helps the resin flow easier and greatly reduces blow-outs. In the case of flowers this takes around 10-20 seconds, but if we’re pressing hash we should wait a little longer, until we can see a little bit of liquid rosin forming at the front of the bag. Now we can start to increase the load on the press gradually until we reach our maximum desired pressure (See below for a word on this subject, but more isn’t necessarily better).

With the material heated and under full pressure, it won’t be long before we start to see the melted resin dripping out from between the plates. All we need to do now is watch carefully, waiting for the flow of rosin to slow down and stop completely. This will take anything from one to five minutes, depending on the quality of the starting material and the temperature being used. Once you’re happy that no more rosin is coming out, it’s time to release the pressure and open the plates to retrieve the parchment paper with the mesh bag and rosin on it. Now just let it cool to allow the rosin to solidify (Placing it in the fridge for a few minutes is usually enough) before starting to collect it from the parchment.

The rosin is beginning to flow

Collecting the Rosin

After a few minutes in the fridge, the rosin should be solid and ready to collect. This can be done with a dabber, carefully scraping the parchment and accumulating the rosin on the dabber tip, before transferring it to a glass jar, silicone pot or oil slick paper for convenient storage. Depending on the temperature used and freshness of the flowers, some cannabis varieties produce a very runny, sappy texture of rosin that can be a challenge to collect, as it won’t solidify in the fridge, and even placing it in the freezer doesn’t help much. In these cases we can use an object with a flat surface that’s been kept cold in the freezer, for example a thick plate, or an ice-pack. By placing the parchment with the sappy resin onto this cold surface, we can make collecting much easier and a lot less messy.

After a successful press, the rosin is ready to be collected

After collection we recommend storing your rosin in the fridge to best conserve the aromas and flavours. When you take your concentrate out of the fridge, allow it to warm up to room temperature before opening the container, otherwise any humidity in the air will condense on the Rosin, which can affect quality and lead to the extract hissing and “spitting” steam when dabbed on a hot nail.

The filled rosin bag that we’ve just pressed will still contain a certain amount of resin, we can discard this if we want, or we could do a number of things with it to avoid wasting cannabinoids that could still be useful. We can either press it for a second time, which would extract a small amount of darker rosin that would be ideal for making edibles, or we could extract the oil via maceration the bag in ethanol or olive oil, for example, to make tinctures or oil for cooking.


This mesh bag of flower has blown-out under excessive pressure

One we’ve got the temperature and timing dialled in, a blow-out is pretty much the only thing that can go wrong when pressing rosin. This mostly occurs while pressing rosin from hash, when too much pressure is applied to the bag too quickly, rupturing the seam and spilling the unfiltered hash out onto the parchment paper.

It’s important to avoid this not only because the blow-out will potentially contaminate the rosin already extracted from the bag, but it also means that to salvage the escaped hash and get any more rosin from it, we’ll have to re-pack it into another bag and press it again. In this case the degradation of the cannabinoids and terpenes resulting from heating up twice will mean our extraction will lose a great deal of quality, be significantly darker in colour and have a much less attractive aroma. Blow-outs can also occur when pressing flowers, but they rarely cause the same problems as with hash, not contaminating the rosin to anywhere near the same degree.

We can help to minimise blow-outs by doing three things, firstly don’t over-fill the mesh bags, secondly, use a second, larger mesh bag with hash presses, as outlined above, and lastly, apply pressure gradually and slowly, allowing the material to heat up before giving full pressure.

A word about maximum pressure

Contrary to popular opinion, more pressure isn’t necessarily better. It’s important to have adequate pressure to be able to extract the maximum amount of resin from our starting material, but there’s no need to have, for example, 30 tons of pressure on 3″ x 7″ plates. It is quite widely accepted among experienced extractors that the maximum pressure necessary is around 1000 psi at the point of contact. Applying more pressure than this will force out other, less desirable compounds from the plant material, e.g. chlorophyll, fats, waxes and lipids that, while they may add to the overall yield weight, will decrease the quality of the final product.

We can easily calculate the required pressure by measuring the dimensions of the filled mesh bag being pressed (not the dimensions of the plates). Therefore, if we’re pressing a bag of 2 x 4 inches, it has a surface area of 8 square inches, so to apply 1000 psi to it we would need 8000 pounds of pressure, or just 4 tons. Bearing in mind that, for safety reasons, we should only use a hydraulic press to a maximum of 80% of it’s capacity, we only need a 5 ton press to effectively use 3″ x 5″ plates, which is the most common size on the market today.

In the following video you can see Rosin’s process step by step:

We hope this article has given you an idea of how to handle a hydraulic rosin press and get the best results from it, but if you’ve any further questions, leave a comment below and we’ll do our best to help.

As rosin gains more popularity as an easy, safe and clean extraction technique, so the hardware being used has improved in leaps and bounds, and a w

Best Rosin Press Guide, DIY How to Make Rosin Cheap

Ultimate guide to making rosin. The best rosin press machines starting from cheap hair irons to DIY rosin plates and full kits.

Bob Glob is a cannabis activist and hash connoisseur striving to bring you the latest info in trichome extractions! Check him out at


So you heard about rosin.. Here we go, let me start from the beginning.

Hash Church Episode XXV ROSINTECH (March 15th, 2015 YouTube ). We had all been happily watching Bubbleman and his gaggle of dabbers for weeks now, never to realize Soilgrown Sal would be invited on to share this new, and soon to be revolutionary, tech he had discovered. While pressing some bubble hash with a hair straightener to make it dabbable, he discovered ROSIN.

Rosin is by definition a softening of the trichomes through heat along with an extrusion of the softened trichomes via pressure. In the early days all we knew was a hair straightener. Grab a bud, stuff it in some parchment, squeeze and viola! Fresh, tasty (sometimes), and ready to smoke dabs! Very quickly the rosin press market developed. Some good, some bad, and most ugly.

How To Make ROSIN (Rosin Pressing)

The simply described way to make Rosin is this:

  1. Take a rectangle of parchment paper and fold in half the long way.
  2. Take a bud and place in the center of the fold in the parchment
  3. Place wrapped bud in preheated hair straightener or Rosin press and press.
  4. Remove “squished” bud and collect rosin.

Let me elaborate on all of these steps.
When selecting parchment, it is best to select a natural or organic option, if possible. Allow enough room for the bud to “stretch” as it is squished, and room for the oil to spread around the bud.

** An additional tech that came along, is called directional flow. After folding paper in half and loading product into the center, Then fold each side diagonally on each side of bud, as to direct the pressed oil towards the front of the created pocket.

The biggest key to Rosin is the beginning product. High quality fresh nugs and bubble hash will produce the finest quality rosin. Another factor is that every strain will product different results. Start small, experiment, and with good results, continue. When pressing bubble or shake, use an unbleached coffee filter, tea bag, or specialized rosin bags like these on Amazon to prevent plant material getting into your fresh rosin!

Tips for High Yield Rosin Pressing

When PRESSING there are 3 KEY factors. TIME of press, and TEMPERATURE of plates and PSI! Since every strain of cannabis will react differently, you’ll need to play around with time and temperature to find what works best with your product.

How to Find the PSI of a Rosin Press

To find the PSI of your setup, take the pressure (tons, lbs, etc.) and divide it by the surface area of your plates. I would recommend staying above 1,000 PSI for an effective press.

3″x3″ plate on a 10-ton press
3 x 3 = 9 sq in of surface area
10 tons = 20,000 lbs
20,000 / 9 = 2,222 pounds per square inch (PSI)

Best Temps and Time for Rosin Pressing

When it comes to finding the best time and temp for rosin pressing, you weigh the benefits of yield versus terpene preservation. Nobody can really give you the best exact time frame, it’s something you need to feel out with the press you’re using.

🔥 Hot press is 190–240°F for 30–180 seconds. Hot pressing rosin gives an oily or shatter consistency. The terpene profiles may not be as carefully preserved, but yields are higher than cold pressing.

❄️ Cold press is 160–190°F for 60–300 seconds. Cold pressing rosin makes a thick budder consistency. The best terpene preservation, but yields are lower than hot pressing.

⚠️ Terpenes often degrade at over 250°F. Flowers (buds) are usually pressed hotter than bubble hash or sift, which extracts fine at lower temps.

Recommended Temps
Buds: 180–230°F
Hash: 160–190°F

When collecting rosin, if product is sappy, place on a moisture-absorbing surface to stiffen.

Cheapest Way to Press Rosin: Hair Straightener

Any hair straightener will do. Try to find a model that can be turned down super low like this one on Amazon , but here’s the thing about using flat iron hair straighteners for making rosin. Eventually you are going to break it.. One way or another.. You’ll stand on it, put it in a vise, and eventually it will break.

Temp guns are necessary because the temperature of plate vs. heater (readout on display) generally differ 5–30ºF.

As an alternative rosin pressing method, you can simply disassemble the straightener and remove all the plastic, leaving only 2 heated plates and a controller. Now how do you apply pressure? The best option to be found is a handheld “Quick Clamp”.

Build your own, check out this Reddit post for an example of the DIY hair straightener quick clamp rosin press.

DIY Rosin Press Plates for Quick Clamp

This is a cheap hack to upgrade your rosin pressing on an affordable budget. An easy DIY rosin press setup consisting of heated aluminum plates, pressed to 600 lbs (272 kg) of clamping force. Use smaller-sized 2″x3″ plates on a Dewalt Trigger Clamp or Irwin Hand Clamp . The DIY rosin plate kit below sold by Midwest Concentrates can be bought as a complete kit or plates only.

Featured—DIY Rosin Press Clamp Plate Kit: CannaClamp

The Next Step
Now you’ve seen rosin made right in front of you, you’re excited to make more and more. You’ve gone through 4 hair straighteners, a roll of parchment, 2 ounces of bud and you have barely any rosin to speak of.. If you want to process more than a gram or two at a time, you’re going to want to invest in a rosin press with a higher PSI. Simply put this is a shop press, bottle jack or hydraulic press with 2 heated plates.

DIY Rosin Press Plates Kit

You can fit an custom DIY kit onto a standard hydraulic shop press to turn it into a fully functioning press for making rosin. These DIY rosin press kits include rosin press plates, heating rods, double PID controller and cords.

Featured—DIY Rosin Press Shop Press Plate Kit: New 3×5 Inch Uncaged by Dabpress

Caged DIY Rosin Press Plates Kit

Caged rosin press designs help to keep plates in perfect alignment during operation. The extra stability provided by the frame ensures steady long-term usage with consistently flush plates.

Featured—New 3×7 Inch DIY Caged Heat Press Plates Kit, Build A 10–20 Ton Press by Dabpress

Manual Rosin Press

The next cheapest option and most reliable, but it will make you work for it. If you’ve ever jacked up a car, well this is the same jack. No extra features to worry about and total control make this the best option for a beginner. Don’t forget your PSI! Have plates in mind before buying a press, or check the sizes when buying a kit. (**T Shirt Presses and the like, do not work well for this reason)

Best Cheap Manual Press:

MyPress Gen 2 is a new release, portable 6-ton manual rosin press equipped with 3″×3″ heated stainless steel plates. Easy to use—just turn on, dial in the temperature, insert paper/flower and pull down the handle. A LED counter shows the elapsed time between closing and re-opening the plates, so you can record the best settings for yield or quality.

Max Rated 6 tons
Temp Range 150–250ºF / 71–104ºC
Plate Size 3.07” x 3.07”
PSI 1,333.33

Hydraulic Rosin Press

A hydraulic rosin press uses hydraulic pressure to create the force necessary to extract rosin. No air compressor needed! Once the pressing plates are heated to the desired temperature, simply crank down the hand pump in order to operate a hydraulic rosin press. When shopping for a hydraulic rosin press, look for a high pressure model, starting at 10 tons (20,000 lbs).

Most Affordable Best Hydraulic Rosin Press:

The Dabpress 10-ton Driptech hydraulic rosin press comes equipped with heavy duty 3″x5″ plates, built-in digital temperature and timer gauge. Driptech allows rosin to fall immediately to parchment paper, preventing overheating to preserve terpenes best.

Max Rated 10 tons
Temp Range Up to 482ºF / 250ºC
Plate Size 4.7″ x 4.7″
PSI 1,333.33

Hand Crank Rosin Press

Hand crank and grip twist rosin presses are another manual design featuring high pressure, temperature-controlled heated plates put together into plug-and-play, rosin making machine. You will want to bolt this model onto a secure surface for best results.

Best Rosin Press Hand Crank Model:

GDAE10 Heat Press.

Max Rated 10 tons
Temp Range Up to 491ºF / 255ºC
Plate Size 2.4″ X 4.7″
PSI 2,000

Pneumatic Rosin Press

While a pnuematic rosin press will cost you a little more, if you’re looking to press rosin long term this might be your best option. Pneumatic rosin presses are easy to use. Simply press a button and your press is activated! You’ll also need an air compressor to go with this one.

Best Cheap Pneumatic Press for Rosin:

CA Heat Press Pneumatic Rosin Press. Adjustable pressure up to 5,000 PSI!

Max Rated 20 tons
Temp Range Up to 500ºF / 260ºC
Plate Size 6″ x 8″
PSI 5,000

Hybrid Electric Rosin Press

Hybrid electric rosin presses use electricity to power the hydraulic cylinder, so you don’t need to press it down by hand. Just switch the buttons to accomplish pressure-controlled or gradual pressing. These high-tech rosin presses are far from the most affordable, with many priced in the thousand-dollar and up range.

Best Rosin Press Hybrid Electric Model:

Dulytek Elite 10-Ton Electric Hybrid Heat Press with real-time force display and dual temp controls adjustable up to 300°F / 150°C.3″x5″ plates. Uses 880W of power.

Disclaimer: we do not promote or undertake in illegal activities.

Ultimate guide to making rosin. The best rosin press machines starting from cheap hair irons to DIY rosin plates and full kits.