How To Get Seeds From Marijuana

Breeders have begun specializing in the cultivation of cannabis seeds. Find out more about how breeders pay special attention to the pollination, harvest time, and drying process for the seeds to improve the likelihood of a successful harvest. Ever wondered how those marijuana seed banks make feminized seeds? Learn how to create your own feminized seeds at home using two female plants! During its life cycle, cannabis passes through four main stages. These stages are germination, seedling, growth and flowering. Anyone who wants to cultivate cannabis needs to recognise these stages. Each stage brings its own challenges and problems.

The Importance of Collecting and Harvesting Cannabis Seeds

T here was a time in our not-too-recent history when a sack of weed almost always included seeds. However, as cannabis cultivation evolved, so did the demand for sensimilla, or high-quality, seedless cannabis. Breeders not only began developing their own customized strains, they also started specializing in the cultivation of very special cannabis seeds. These seeds are used in both the breeding process and the wide-spread distribution of the carefully created strain itself.

Related Articles

  • Autoflower Seeds Explained
  • Do Cannabis Seeds Go Bad?
  • What to Look for When Buying Cannabis Seeds
  • Ultimate Cannabis Seed Feminizer: Colloidal Silver

The Role of Seeds in the Breeding Process

The process of breeding the perfect strain requires a controlled production of seeds. Breeders must force their favorite plants to produce pollen and then use it to pollinate other favorite strains, thus creating “cross-breeds” of their two selected parents. Note that this process is not haphazard like the seeds one might find in a poorly-controlled outside marijuana grow – cannabis seed cultivation is a precise process that requires controlled, sanitary environments that are thoroughly sealed to prevent outside dander from getting in.

The plants can “veg” here, or continue their vegetative growth phase if trying to increase their size before seed production begins, but it’s not necessary. Once the plants are large enough, they are put into a flowering light cycle of 12 hours light and 12 hours of complete darkness.

Within a few weeks, the male will produce pollen sacks which will soon burst and get carried off into the air to pollinate the females. The females will now produce seeds which may continue to be used in the breeding process or harvested and sold to the public.

For the purpose of seed production, only around 20 females are recommended per male. However, a single male can realistically pollinate hundreds of females, hence the importance of a tightly sealed environment during the seed production process.

Natural Cannabis Seed Production

Cannabis is an amazingly resilient plant and doesn’t require male pollination to produce seeds. Evolution has bestowed upon the cannabis plant an amazing ability to self-pollinate when there are no males around to do it for her. Whether stressed or old (for example, a female cannabis plant that is not harvested before her prime), if a female senses an environment that is not conducive to long-term growth, she will produce seeds in hopes that her legacy will continue.

This is how feminized cannabis seeds are produced. Breeders will carefully stress a healthy female plant to “trick” her into thinking her life or safety is in danger.

One common method is to stress the female by applying solutions like colloidal silver or silver nitrate generously onto the leaves when she first enters the flower light cycle. Within 3-4 weeks, male sex organs will appear on the nodes of the female plant. Please note, applying these stress-inducing solutions to plants renders them unsmokable. The particulate cannot be washed off thoroughly because it settles deep into the surface of the plant. This method is for seed production only.

Another method is to simply let a healthy female age. If she grows past maturation, she will produce male “banana” pollen sacks without any male chromosomes. Though she may look like a hermaphroditic plant at this point (one containing the chromosomes of both male and female), the pollen she produces will contain only XX chromosomes and therefore cannot pass the Y (male) chromosome down to its heirs. Pollen collected in this way is then used to pollinate another female which will then produce female-only seeds.

How to Collect Cannabis Seeds

Though many grow ops aim to do away with seeds to grow fine sensimilla instead, sometimes breeders want seeds. Whether to grow their own crops or to sell to a demanding public, cannabis seed cultivators have their goals set on producing healthy, happy seeds in lieu of big, beautiful buds.

Seed crops are harvested when the seeds are plump and dark, often with a tiger stripe appearance (around six to eight weeks into flowering).

After harvesting, the bud is dried and the seeds are collected. Small-scale seed collection is done by simply crumbling the cannabis flower and collecting the seeds that fall out (this video by Johnnys Green Extractions offers a clever way to separate seeds from flower using an old vinyl record cover).

Commercial seed collection usually involves special machines that crush dried flower then pass the trim and seeds into separate bins. After seeds are collected, they’re stored in opaque, air-tight containers to prevent them from rotting or sprouting prematurely.

Conclusion

Though cannabis flower is usually cultivated to be seedless, sometimes the seeds are the whole point. Breeders pay special attention to the pollination, harvest time, and drying process when growing cannabis specifically for the seeds to improve the likelihood of a successful harvest.

Frequently Asked Questions

How are Feminized Seeds Made?

Feminized seeds are made by inducing a female plant to produce seeds without being pollinated by a male. These resulting seeds will not contain a male Y chromosome, only retaining the two X chromosomes from the female plant, and thus all of the resulting seeds will be female. This process can be done by stressing the plant, altering it with chemicals, or allowing it to grow past its harvesting time.

How Many Plants Can a Male Cannabis Plant Pollinate?

For professional production, it is recommended to pollinate about 20 female plants per male plant, but this is done to ensure tight oversight and quality control. In the wild, a single male plant can pollinate hundreds of female cannabis plants.

Can You Smoke Cannabis That Has Been Treated with Colloidal Silver?

No, colloidal silver is only used on plants raised for seeding purposes, it makes the plants that it is sprayed on unsmokable.

How are Strains Crossbred?

Cannabis breeders create crossbreeds by using the pollen of one strain to pollenate seeds with another strain. The resulting seeds will have genetics from both parents. These new plants are selected by their desirable traits and then stabilized through further breeding, typically using the genetics of their parent strains.

Have you ever harvested cannabis seeds? Share your experiences in the comments below!

Author

Abby is a writer and founder of Cannabis Content, a marketplace designed to connect cannabis writers and creatives with businesses in the industry. She has been a professional cannabis writer since 2014 and regularly contributes to publications such as PotGuide and M&F Talent. She is also the Content Director at Fortuna Hemp, America’s leading feminized hemp seed bank. Follow Abby on Facebook, Twitter, and Linkedin.

How to Make Feminized Seeds at Home

First of all, what are “feminized” marijuana seeds? Although male and female plants look the same when young, only female cannabis plants make buds. Male cannabis plants grow non-potent pollen sacs instead. Male plants also lower yields and cause seedy buds if they’re left among your female plants for too long. Because male plants don’t make buds and their presence reduces the quality of buds, most growers toss male plants the moment they see pollen sacs forming. However, since about half of regular cannabis seeds end up being male, that means you end up tossing half your plants once they start flowering.

Feminized seeds come from two female plants being bred together, causing all offspring to be female (which means every plant makes buds)

While regular seeds make female plants about half the time, feminized seeds only create female plants. That means you won’t need to toss half the plants once they start flowering. But how are feminized seeds made and can you make them at home?

Feminized seeds are created by breeding two female plants together. Because there are no male parents, all the resulting seeds end up being bud-bearing female plants. With feminized seeds, you can count on every plant to produce buds. Learn more about male vs female plants and feminized cannabis seeds.

Feminized seeds are available from seed banks for nearly every popular or famous strain. Breeders understand that a lot of people just want to grow plants for buds, and don’t care about making a robust breeding program (which is one of the main reasons growers want male plants).

You can’t see the difference between male and female plants until they start flowering (unless you do a genetic test). Feminized seeds ensure all plants are female so you don’t need to worry about it. You know that every plant is female from germination.

So how do seed banks feminize their seeds? How do you breed two female plants together?

The main idea is to force a female plant to produce pollen sacs like a male plant. These flowers (growing on a female plant) create pollen, which can be harvested and used to pollinate another female cannabis plant. The resulting seeds will all end up being female. Can feminizing seeds cause hermaphrodite plants?

See also  White Marijuana Seeds

Growers can force a female plant to make pollen sacs, and the “feminized” pollen produced can be used to fertilize another female plant. The resulting seeds will only produce female plants.

How do you force a female plant to make pollen?

There are two main ways to make feminized pollen:

  1. Induce feminized pollen chemically (Recommended) – This is the professional way to feminize seeds and is how reputable seed banks and breeders create feminized seeds to sell to the public. Substances that interact with plant processes such as colloidal silver or gibberellic acid are applied to bud sites of a female plant when they start flowering. Bud sites are drenched daily for the first 3-4 weeks after the switch to 12/12. This causes a female plant to produce pollen sacs which release feminized pollen when they open up. This pollen is used on another female plant to produce feminized seeds. This article will give you step-by-step instructions on how to feminize cannabis seeds using this method.
  2. Rhodelization (Not Recommended!) – In some cases, a female cannabis plant may naturally start making male pollen sacs or bananas, which can self-pollinate the plant. This happens if the plant is stressed, or if the plant is not harvested in time and buds start to die of old age. The plant is basically doing everything it can to make seeds and save the next generation. This method is “natural” and these seeds end up being mostly female. The problem with this method is you’re selecting for plants that naturally turn into hermies (grow both male and female sex organs) without any chemical induction. This means the resulting seeds are much more likely to turn hermie in natural conditions, too. That’s a problem if you don’t want seedy buds every time you harvest. For that reason, it’s highly recommended you don’t feminize seeds this way. It’s also a good idea to toss any and all seeds that are the result of natural herming (for example seeds you find in your buds even though you didn’t grow any male plants).

Read this article for more in-depth discussion about the pros and cons of each method, and how to avoid hermaphrodite plants when producing your own feminized seeds.

Overview: How to Make Feminized Seeds

This is a quick overview of the process, and then I’ll give the full details and steps below.

1.) Buy or Make Colloidal Silver – The article below will teach you how to make colloidal silver at home, as well as show you where to buy it if you don’t want to make it (it’s actually pretty cheap). It’s basically a solution of silver suspended in water and is available online and in health stores as a dietary supplement.

What about gibberellic acid? From what I understand it can be used exactly the same way as colloidal silver to induce female plants to produce pollen, but I don’t know the recipe for an effective gibberellic acid solution. On the other hand, I know that this exact colloidal silver method works for making feminized seeds. That’s why I’ve only included instructions for colloidal silver. If you’ve used gibberellic acid to make feminized seeds; we’d love to hear from you.

2.) Spray the bud sites of your known female plant daily during the first 3-4 weeks of the flowering stage (until pollen sacs form and start splitting open) – After switching to a 12/12 light schedule to initiate the flowering stage, choose bud sites on your known female plant, and spray/drench them daily with colloidal silver (or gibberellic acid). As the treated flowers develop, they will form into male pollen sacs instead of regular buds. Untreated bud sites on the plant will form into female buds as usual; however, these buds are unsafe to smoke unless you’ve been very careful to make sure they didn’t come into contact with colloidal silver or gibberellic acid during the feminization process as these are unsafe for smoking.

3.) Harvest “Feminized” Pollen – When pollen sacs are ready to be harvested they swell like a balloon and start to open up. Don’t harvest early! Keep spraying the bud sites daily until pollen sacs open or you might end up with empty pollen sacs. When the pollen sacs are ready, the leaf section protecting the pollen will start to crack. At this point, it’s time to collect the feminized pollen. One of the easiest ways to do this is to collect the pollen sacs directly and let them dry for a week. At that point, they can be placed in a bag and shaken to collect all the pollen.

4.) Pollinate Another Female Plant – At this point, take the feminized pollen you’ve collected and use it to pollinate a female plant that has been flowering for about 2-3 weeks (full detailed instructions with a video on how to do this below). Although it’s possible to pollinate the same plant as the original, it’s not recommended in part because the timing doesn’t match up (pollinating buds late in the flowering stage doesn’t produce many seeds). It’s best to pollinate a different female plant that you started budding a few weeks after the original. This increases the number of seeds produced as well as gives the new female plant enough time to develop them to maturity. It also increases genetic diversity compared to self-pollination.

5.) Wait ~6 Weeks After Pollination to Harvest Seeds – After about 6 weeks from pollination, the calyxes on the buds of your female plant will be swollen and fat. You know it’s time to harvest your seeds when they start bursting out. At this point, it’s time to congratulate yourself because you’ve got feminized seeds!

Now that you’ve gotten the overview, here’s the feminization process with detailed step-by-step instructions…

Step-By-Step Instructions (with pics!)

1.) Buy or Make Colloidal Silver (or Gibberellic Acid)

Where to get Colloidal Silver (your options):

    Buy Ready-To-Use Colloidal Silver: Colloidal silver is sometimes used as a dietary supplement, so it’s relatively easy to find (never take it without talking to a doctor first though!). If you’re purchasing colloidal silver, try to find a solution that has at least 30 PPM (parts per million) of silver or higher.
  1. Buy A Colloidal Silver Generator Kit: If you plan on feminizing a lot of seeds, you may want to invest in a generator kit so you can easily make your own endless supply of colloidal silver. This is cheaper in the long run compared to buying it ready-to-use.
  2. Make Your Own: You can make your own colloidal silver generator at home. The following diagram illustrates what you need to do.

Note: You can purchase gibberellic acid online (a gibberellic acid solution can be used the same way as colloidal silver for feminizing seeds). However, I do not have experience with the gibberellic acid method and don’t know the best way to prepare the solution.

2.) Spray the bud sites of your known female plant daily during the first 3-4 weeks of the flowering stage (until pollen sacs form and start splitting open)

Wait until your plant is 5-6 weeks old before initiating the flowering stage. Some young plants seem to have trouble (and take much longer) to go through the feminization process, and their pollen may not be as fertile, so start with a more mature plant.

When plants are ready, change to a 12/12 light schedule to initiate flower formation and put cannabis plants in the flowering stage. Note: If you’re feminizing an auto-flowering plant, start spraying daily when the plant is about 20 days old from seed. This is when most auto-flowering cannabis strains start making flowers.

As soon as you change the light schedule (and maybe even a day or two before) start spraying your plants thoroughly with colloidal silver at every bud site you want to form into pollen sacs.

Spray bud sites thoroughly, drenching them with colloidal silver every single day. Bud sites are located wherever leaves meet stems.

The above pic shows you where pollen sacs form on the plant (the same places female buds form).

Important! Keep spraying daily until pollen sacs open up. Don’t stop spraying early, even if pollen sacs appear to be already formed, otherwise they may not produce much pollen

A spray bottle / mister is really helpful for spraying bud sites evenly and thoroughly

You can choose to treat a single bud site or all the bud sites on the plant. Any untreated bud sites will develop into female buds as usual. If you want to smoke these buds, it’s incredibly important to avoid letting them come into contact with colloidal silver because silver is not safe to smoke. (Don’t worry, feminized seeds don’t contain any silver). I highly recommend letting the whole plant be your test subject so you don’t have to worry about that

3.) Harvest Your Feminized Pollen

When pollen sacs are starting to crack and look like they’re about to open up (or if you can see one has already opened) then your pollen is ready for harvest!

When pollen sacs are cracking and opening up, you’re ready to harvest your pollen!

Pollen spilling onto a nearby leaf

One way to harvest your pollen is to gently and carefully remove all the pollen sacs. Let them dry in open air for a week, and then put them in a resealable bag. If you shake the bag the pollen should easily spill out. You may need to cut a few open yourself.

See also  Gorilla Glue Marijuana Seeds

How to Store Feminized Pollen: Moisture is your main enemy when storing pollen. It can help to double the mass of the pollen collected by adding regular cooking flour. This absorbs moisture during storage and as an added bonus, it increases the volume to make application easier when you get to pollinating. If pollen is totally dry and you triple-bag the pollen-flour mixture and stick it in the freezer (with a good nametag so you know where the pollen came from), your pollen can be stored for a year or longer. You can add a few silica packs (which suck out any remaining moisture) in the bag to make extra sure that the pollen stays totally dry.

4.) Pollinate Another Female Plant

When your chosen mother is 2-3 weeks into the flowering stage, take a small paintbrush or powder brush and ‘paint’ your feminized pollen on the developing bud sites you want to pollinate. Bud sites (for both male and female plants) are located wherever you can see leaves meet a stem.

Buds are ready to get pollinated when they look like little bunches of white hairs

Only the buds that come in contact with pollen will grow seeds. You can choose to pollinate all of your buds or just a few on the plant.

Here’s a video by Ed Rosenthal on Youtube showing you how to pollinate buds with pollen. Make sure to touch all the female pistils/hairs with your pollen.

5.) Wait About 6 Weeks Then Harvest Seeds

It usually takes about 6 weeks for your feminized seeds to fully develop. Some plants are literally dying right as the seeds become ready, so to get the most viable seeds, you need to try to keep it alive until the seeds actually start dropping. The seeds can be used right away, or stored in a cool, dry place for a few years. Don’t forget to label them with the date.

This seed is about to burst out of its calyx

This is what it looks like when the seed is exposed

Picture Journal of Making Feminized Pollen with Colloidal Silver

This grower initiated the feminization process on a seedling that was only a few weeks old. As a result, the plant wasn’t able to get big enough to produce many pollen sacs. You will get even better results if you start with a plant that is at least 5 weeks old

October 18 – Plant right before the switch to 12/12

October 27 – After being drenched with colloidal silver daily for a little over a week

October 30 – Pollen sacs are forming

November 15 – Pollen sacs appear to be almost fully formed and are swelling in size, but haven’t opened up yet. Don’t stop spraying colloidal silver or you may end up with empty sacs!

November 27 – Pollen sacs are opening up! Collect the pollen before they’re all open!

FAQs – Frequently Asked Questions

How can I identify plant gender before the plant actually starts flowering?

There are a few ways to identify plant gender before the plant actually starts flowering, and each is helpful in different situations.

  1. Use feminized seeds – All your plants will be female if you start with pre-made feminized seeds.
  2. Start with a clone – A clone is an exact copy of another plant. If the “mother” of the clone is a female plant, it means the clone is also female
  3. Look at preflowers (identify plants when they’re 3-6 weeks from seed) – If you know where to look, cannabis plants will actually reveal their gender in the vegetative stage when they’re just 3-6 weeks from seeds. Male plants usually show their gender by 3-6 weeks and female plants usually show their gender around week 4-8 from seed. Learn how to determine the sex in the veg stage by looking at preflowers.
  4. Test the leaves of your seedling in a lab – It’s possible to send in a leaf from a young cannabis plant to a specialized testing company, and they will be able to determine the gender as soon as 3 weeks from seed! Although I haven’t used any of these companies and can’t recommend any in particular, here’s a link to one example just so you can see what I’m talking about. From talking to other growers who use this method, it appears to be accurate.
  5. Take a clone and force it to start flowering – if you take a clone from a vegetative plant, you can force that clone to start flowering and reveal its gender. You’ll know the sex of the “parent” plant by the sex expressed by the clone. This is what I do to determine the sex. I cut off a piece of the plant, stick it in a glass of water (don’t forget to label it with the strain), and give it a 12/12 light schedule until the little piece starts forming either pollen sacs or buds.

The easiest way to identify sex with unknown seedlings? Cut off a small branch of the plant, stick it in a cup of water with a label, and keep it in a sunny window on a 12/12 light schedule until buds or pollen sacs start forming. As long as the plant is getting bright light in the day and long dark nights, it will reveal its sex in just a few weeks (you don’t even need to wait for roots to form).

Can I Make a Breeding Program Using Just Female Plants and Feminized Seeds?

Yes, it’s possible to use just female plants and feminized seeds for further breeding, with one major caveat.

Without careful and thorough testing, it may be possible to accidentally select cannabis plants that tend to herm (make male flowers or pollen) and cause seedy buds when you don’t want them to.

For each possible “mother,” clones should be grown in several different environments and tested thoroughly to make sure that the mother plant does not have any tendency to make pollen naturally in normal or stressful conditions. It’s okay if plants grow pollen sacs if induced chemically since that is very unlikely to happen in someone’s garden on accident, but you don’t want plants that will start growing male flowers on their own without chemical induction. Thorough testing of plant hardiness is always important when breeding, but it may be especially important when breeding feminized seeds together.

Are there other reasons I should avoid breeding seeds without males?

The most common reason growers say you shouldn’t do this is because it’s “unnatural” or doesn’t “seem right.” Some growers say you need male plants for genetic diversity. I’ve also heard growers say that the resulting plants will be weaker, sterile, and less potent. Someone once even told me that resulting plants “will be worse in every way.”

As of yet, I haven’t seen any of these claims backed by actual personal experience, or any real-life examples showing why using feminized seeds is not a viable way to breed new strains.

To those who say this type of reproduction just doesn’t seem right, the evolutionary strategy of plants using only female and hermaphrodite plants to breed is actually pretty common and is known as gynodioecy. One example of a plant that only reproduces this way is a flower found in Canada and the US called Lobelia siphilitica, also known as the Great Lobelia. Obviously, this reproduction method isn’t exactly the same as artificial feminization since the pollen production is caused naturally instead of induced chemically, but examples of gynodioecy show that a female flower-based breeding population can exist in the wild even when no plants are purely male.

The Great Lobelia naturally reproduces using only female and hermaphrodite plants. This is similar to the cannabis feminization process because it results in a population of plants that all primarily grow female flowers, with no pure male plants

When it comes to genetic diversity, the ability to cross out to thousands of different cannabis strains allows you to dramatically increase the gene pool without using male plants. So those are my answers to the common objections of a feminized seed-based breeding program, however I am just a theory-crafter when it comes to this topic. It certainly seems possible that a feminized-only breeding program could run into unforeseen problems down the road, but as far as I know there isn’t any evidence of that so far.

Although I have a few anecdotes from growers who have used only feminized seeds for a few generations, it would be much better to share information from someone who has conducted plenty of testing over several generations. We’d love to hear from you if you have bred more than a few generations using only feminized seeds and want to share your experience.

What are the positive aspects of breeding two feminized seeds together?

Besides not having to worry about male plants in the next generation, the main advantage of doing this is you have a much better idea of what you’re working with when it comes to producing the type of buds you’re looking for. When you’re growing a male plant, it has several genes it will pass to its offspring that has to do with how buds develop, but since it’s a male plant those genes aren’t expressed and it’s hard to figure out what they are.

Historically, the way to learn more about the “hidden genes” contained in a male plant is to breed it to several well-known female plants and see how the offspring compare to each other. The genes that don’t come from the known mother plant are assumed to come from the male. Another way of going about this is to take several clones of the same well-known female plant and breed them with many different male plants to see which ones produce the best offspring.

See also  Marijuana Seeds Arkansas

After testing with several pairings, you start to get an idea of the hidden genes a male plant has to offer to its female offspring. This time-consuming process of documenting and identifying good male plants is why proven stud male plants are one of the most valuable and closely guarded types of clones available today.

But the process of finding the right “father” is a little different when you start with two female plants. In this case, you already know quite a bit about the genes of both parents because you can just look at and test the buds of both plants directly. This allows you to pinpoint desirable genes with less guessing and much less time spent growing out and cataloging plants.

Breeding two female plants together offer hints about what kind of buds their genes will produce

Why even have male plants then?

In nature, male plants are effective at increasing genetic diversity by ensuring cross-pollination. With only purely male and purely female plants, every resulting seed will have two different parents.

Another big advantage in the wild of having separate female and male plants is sexual specialization. In other words, plants are able to evolve male and female traits separately, so each type of flower can become more specialized at its unique “job.”

However, this isn’t the only successful breeding strategy for plants. In fact, only 6-7% of plants have completely separate male and female plants like cannabis plants do (known as dioecious plants). Most plants grow some mix of male and female flowers on each plant, with different combinations offering different evolutionary benefits.

You might enjoy this scientific article if you want to learn more about the evolution of sex determination in plants and animals: Sex Determination: Why So Many Ways of Doing It?

And although most cannabis strains (at least the good ones) display either purely male or purely female flowers, there are some wild populations (and some strains of hemp) that regularly produce plants with male and female parts on the same plant.

When it comes to artificial selection for breeding new strains, the grower is in charge of cross-pollination, so there’s no need for the plant to specialize in male parts. Pretty much the only thing most growers care about is how female flowers develop. So (unlike in nature) growers have the freedom to choose plants that improve female buds without even having to consider how it might affect male plants.

Only a small percentage of plant species produce male plants like cannabis.

Can feminizing seeds result in hermaphrodite plants?

The answer is yes. If you do it the wrong way then feminization can lead to plants with an increased chance of herming. However, with a well-tested and well-bred feminization program, one of the main goals is to breed out any plants with hermaphroditic tendencies that show up under normal conditions. When you buy feminized seeds from trustworthy breeders, you can count on the fact that every plant will end up growing only female flowers and that’s it.

This is a relatively big topic with a lot of opposing opinions so I wrote a whole article about it.

Feminizing seeds the wrong way can result in hermaphrodite plants.

Can I pollinate the same plant I collected the pollen from?

Yes, it’s possible. However, it’s not really recommended because, for one, the timing doesn’t match up. By the time your pollen is ready to use, your original plant will already be several weeks past the optimum pollination point. It’s best to pollinate a female plant that has only been flowering about 2-3 weeks, but pollen sacs need more time before pollen is ready to use. It’s also possible to run into unwanted side effects from self-pollination/in-breeding.

One thing to keep in mind is even if you pollinate a plant to itself, the resulting seeds are likely not going to be exact copies of the original (unless the original plant is extremely inbred). The resulting seeds include not just the mother’s expressed genes but also her hidden ones.

The Life cycle of Cannabis: From seed to harvest

Cannabis passes through a series of stages in its life. The most important of these are the germination, seedling, growth and flowering stages. Each stage brings its own challenges. Novice growers need to be aware of these, to be sure of giving their plants the attention and care that they deserve.

Plants are living beings. They are at the base of the evolutionary tree, they heal our bodies and souls, they delight our senses. I think all our readers know by now which is our favourite plant: Cannabis sativa L. – a fantastic crop and medicinal plant, and one of the oldest plant genera in the world.

No matter why cannabis is being cultivated, to see with your own eyes how a small seed grows into a bulky plant, which then starts flowering, is a moving experience every time.

Cannabis is an annual plant, so its entire lifecycle takes place within a single year, with most varieties reaching the end of their life after between four and ten months. In general terms, the following four stages of life can be distinguished:

  • Germination stage
  • Seedling stage
  • Growth or vegetation stage
  • Flowering stage

A quick glance is usually enough to determine the current stage. Over time, it is not just the appearance of the plant that changes, its needs also change. Different stages require different quantities of light, water and nutrients. Furthermore, if you want to determine the sex of the plant or prune it, it is useful to know which stage the plant has currently reached.

1 – Germination stage (1 to 2 weeks)

All forms of life start from a seed of some kind. High-quality seed is the single most important factor for successful cultivation. Cannabis seeds should be hard, dry and brownish in colour. There are a number of different ways of getting the seeds to germinate. The easiest is the paper towel method.

In the germination process, the germ in the seed breaks through its shell and forms a root, which is known as the taproot. Germination takes anything from 24 hours to 7 days. Generally cannabis varieties with a high proportion of Indica germinate faster than pure Sativas.

The germinated seed can now be placed carefully into the growing medium. The plant will start to grow and force its way upwards.

While the first two cotyledons (seed leaves) are being formed, the plant shrugs off the protective seed husk. That signifies the end of the germination stage.

Related post

Top 5 Ways Cannabis Can Affect the Menstrual Cycle

2 – Seedling stage (2 to 4 weeks)

Particular care is necessary at this stage in the lifecycle. Seedlings are susceptible to illnesses and mould. Many novices get carried away with watering and give the seedlings too much fertiliser. Even if you plan to grow outdoors, it may be useful to give the plants a healthy start indoors, assuming that a location is available with adequate light (e.g. a windowsill). The plants need as much light as possible at this stage.

How long the seedling stage lasts depends on the variety and on the environmental conditions. The main focus of the plant is on developing a root system. This forms the foundation for its later growth.

Meanwhile the plant will grow its first “real” leaves with the characteristic marijuana shape.

The leaflets are long and jagged. Initially a leaf has just one leaflet, although a mature cannabis plant will have five to seven leaflets per leaf.

Once the plant produces the full count of leaflets for each new leaf, the seedling stage is over.

3 – Growth stage or vegetation stage (2 to 8 weeks)

Now the plant starts its main growing phase. Provided it receives enough light, it can grow up to two inches (5 cm) in a single day. It is obvious that the plant needs to be repotted if it is still growing in a small pot.

Leafy plants like a healthy soil that is rich in nutrients. The production of chlorophyll and proteins depends on a supply of nitrogen. It is worth investing in the right kinds of fertiliser or even producing them yourself.

As it grows, the plant also needs more water. Young plants are best watered close to their stem, but later on water should be distributed more widely so that the tips of the roots can absorb water more efficiently.

Have you ever heard of topping, super-cropping or lollipopping? Using these techniques you can train cannabis or manipulate the shape of the plant. Growers use them to develop stronger plants with more buds. Opinions vary, however, on whether these techniques actually deliver results. They are only necessary for special cultivation methods such as the Screen of Green (SCROG).

How long the growth phase lasts is not a simple question to answer. Autoflowering cannabis varieties move automatically on to the flowering stage within 2 or 3 weeks. Regular or feminised varieties only start flowering once the days become shorter (outdoor cultivation) or the grower reduces the lighting period to 12 hours (indoor cultivation).