how many watts for weed

How to Produce 1 Gram/Watt of Cannabis

Table of Contents

What Is “1 Gram Per Watt” and Why Do Indoor Growers Want It?

As a cannabis grower, you may have come across this term: “1 Gram/Watt”

What does it mean?

It’s an unofficial measurement for indoor growers that refers to the yield you get from a certain wattage of light. For example if you’re using a 600W grow light, yielding 1 gram/watt would mean you harvested 600 grams of bud. If you only harvested 300 grams, it means you got 0.5 grams/watt (300 grams divided by 600 watts).

Just to put things into perspective, even 0.5 gram/watt is considered a good yield, so going for twice that is pretty crazy!

A yield of one gram per watt is considered the “upper limit” of what’s possible with indoor grow lights (though it can be beaten)! An average-to-good grow yields about 0.5 grams/watt.

One gram per watt is meant to be a sort of “upper limit” of what to expect from indoor grow lights as far as yields. Although it’s possible to get even better yields from your grow lights (especially if you have the resources and space of a commercial grower), even getting close is a difficult task that requires preparation and a good setup. Most people are not going to put in the time or money for this and that’s okay!

In fact, many hobbyist growers aren’t as concerned with yields as much as making sure they’re getting the effects they want from their buds…and that’s the right fame of mind! But even if you don’t care that much about yields, it can still be fun to try to beat your own record!

This tutorial will explain how to use this concept to your advantage, and then I’ll teach you how to actually do it yourself!

3 Important Facts You Must Remember

If you’re going to try for 1 gram/watt, keep the following things in mind…

1.) It’s Really Hard to Get 1 Gram/Watt

Grower Skill & Experience

The skills and experience of the grower make an enormous difference in the yields you get. The first time you’re in charge of growing your own plants, everything you thought you knew about growing will change, trust me!

Even if you start with the best growing setup in the world and have researched growing cannabis for years, it’s still going to take at least a few grows to start getting close to your full potential. Even highly experienced growers need a grow or two to adjust to a new environment before they achieve their best yields!

If you’ve never even grown before, you shouldn’t beat yourself up about yields because you not only have to learn how to grow, but you have to learn how to optimize your particular grow space!

If you start growing in a new space, it almost always takes a few grows to “get the hang of it” and produce the best yields, even for growers with tons of experience! Each grow has the potential to be better than the last!

Gorgeous pic by dr greenthumb SJC

Strain Has a Huge Impact on Yields

The first time I grew a “high-yielding” and a “low-yielding” strain together at the same time, I was shocked. Although the plants themselves were about the same size and grew in the same environment, one plant yielded several ounces more than the other. Although they got the same conditions throughout their lives, one plant’s buds grew fat and dense while the other plant’s buds stayed smaller and more airy.

These buds are both 8 weeks old from 12/12. Although the plants were the same size and grown in the exact same setup, the plant on the right (Wonder Woman) grew much chunkier buds and yielded almost 50% more than the plant on the left (Blackjack)! These differences in yield were based completely on strain, not environment or skill. There’s literally nothing a grower can do to make Blackjack grow like Wonder Woman.

The resulting buds from both strains were great, and I was happy with the yields regardless because even the Blackjack had good yields too! But it really showed me how much of a difference genes make when it comes to yields! You can only get your plant to yield as much as its genes allow, and if the genes aren’t there the yields will be absent, too.

When you’re very concerned about yields, make sure to look only at high-yielding strains when searching for seeds!

You May Need a Better Setup

Adding equipment to control the temperature and humidity (like fans, ducting, an AC, a humidifier, dehumidifier, etc) gives growers an edge, but they may also increase your setup and electricity costs.

If you have a subpar setup for growing cannabis, you’re not going to get the best results even if you have amazing skills and the best grow light in the world!

There’s nothing you can do to make a plant grow well if it’s freezing or sweltering

Learn how to make a perfect growing environment (as a general rule, if it’s comfortable for you, it’s probably comfortable for your plants!)

Consider Supplementing With CO2

CO2 or Carbon Dioxide is a gas in the air that plants use to “breathe” when they’re making energy from light via photosynthesis. If you’re providing a whole lot of light, it might be more than your plant can handle, and too high levels of light will give plants light burn even if it’s cool.

Light burn happens partly because there is not enough CO2 in the air to support that level of photosynthesis. As a result, leaves die early from being “overworked”. You want to get as much light to your plant as possible for the best growth, but if top leaves become dead and yellow from light burn, your buds will stop fattening up!

By increasing the levels of CO2 in the air, you can increase the amount of light your plant can actually use. This allows you to increase the energy produced by the plant beyond what’s naturally possible with your grow light, without light burn. That extra energy results in faster growth!

Did you know? Billions of years ago the atmosphere contained very high levels of CO2, and plants evolved to be able to take advantage of it. Although our air contains much less CO2 now, plants have inherited this ability, and you can use that to your advantage in the cannabis grow room!

There are many ways to increase CO2 levels, including Generators and Compressed CO2 tanks

CO2 might be something to consider if…

  • You have mastered the basics and already take advantage of free ways to increase yields indoors
  • You already have very bright grow lights (like an HPS) – if your lights aren’t bright enough to tax the plant, you’re not going to get any results from CO2!
  • You can afford to supplement with extra CO2 (it can get expensive!)
  • You must be able to seal the grow space to maintain CO2 levels in the air
  • You may need to get an AC and a dehumidifier to keep the environment right, since the temperature and humidity rises with plants in a sealed environment.

However, if you’ve dialed everything else in, CO2 can be used to increase your plant’s growth rate which can help increase yields in a limited space!

2.) Many Growers Don’t Measure Weight Accurately

It can be surprisingly hard to accurately measure bud weight! When your buds are on your plant, they are made up of 75-85% water. After being dried, they will only weigh 15-25% of their original weight.

But what if a grower dries their buds more than someone else? The more you dry your buds the lower the overall weight is going to be, even though your actual ‘yield’ is the same. On the flip side, if you don’t dry your plants fully, your yield weight is going to be artificially inflated!

Growers often measure yields differently from each other! This can make comparing yields kind of like comparing apples to oranges!

Tips for the Most Accurate Comparison of Weights

Buds pop off the stem when they’re dry – You’re not done drying your newly harvested buds until the buds “pop off” the stem on their own if you apply pressure. If the smallest stems bend instead of snap, or pulling off buds is leaving strings behind, it means the buds need to dry more and still have water weight.

Buds should never feel wet or moist from sitting in jars during the curing process. If that happens it means the buds still need to dry out more. If you invest in a hygrometer you can use it to exactly measure the humidity in each jar to make sure it’s perfect. In an ideal world, the air in the jar should level off at around 62% RH when your jars are closed. That’s the best time to weigh your buds. If your humidity levels in your jar are higher than 65%, it means you still have significant water weight left and your bud weight is going to be inflated if you measure it.

A Quart-Sized Jar Holds 0.75-1 Ounces of Dried Buds – A quart-sized mason jar (most common way to store buds) can usually only hold up to 1 ounce of buds unless the bud has extra water weight. This is just a very loose general rule (and can be beaten with very dense buds), but it can help you more accurately assess other people’s harvest weights as well as your own. If you are able to fit more than an ounce of buds in a quart-sized jar, chances are it still has some water weight.

In the following picture there are 6 jars in total (filled up almost to the top). Just by looking at this picture, you can estimate this grower harvested about 6 ounces of bud.

3.) 1g/W Doesn’t Take “Light Hours” Into Account

People use the Gram/Watt measurement partially to decide who is getting the best yields for the amount of electricity used. People most frequently use it to compare the efficacy of different types of grow light. However, this idea is missing a key point!

If you take into account the total amount of time your grow lights are on, it can make a huge difference in the total electricity! The number of hours your light stays on is as important as your lights wattage!

Example of Light Hours

  • 1,548 Light Hours – A grow where lights are on for 86 days on an 18/6 light schedule
  • 1,800 Light Hours – A grow where lights are on for 50 days on an 18/6 light schedule, and 75 days on 12/12 light schedule

Let’s say both these grows yield exactly 1 gram/watt. Although that number is the same, the second grow used 252 more light hours in total, or 16% more electricity to power the lights over the course of the grow!

Even though the gram/watt is exactly the same, the second grow used 16% more electricity (light hours) than the first

You don’t need to get lost in the details here, but this is just something to be aware of. When it comes to figuring out what’s the most electrically efficient as far as yields, pay attention to how long the grow takes and how many hours/day the lights were on, not just the wattage of the light!

If you start paying attention to this when looking at grow journals, you’ll notice that in general, more light hours overall tends to be associated with higher grams/watt (more light to the plant = more growth on average). When grows are shorter with fewer light hours, the grams/watt tends to be lower.

How to Actually Achieve the Elusive 1+ Grams/Watt

At this point you’ve learned that 1 gram/watt is more of a general idea or goal than a concrete measurement of anything, but why not achieve it in your own garden?

If you want to be able to impress your friends and fellow growers by hitting 1 gram/watt, I’ll teach you how!

These tips may seem simple, but if you follow them all it will make a huge difference.

1.) Control the Growing Environment

Keep temperature between 65-85°F (18-30°C) during the whole grow. If you want to get even more specific, try to stay around 75-80°F (24-26°C) during the day, and a few degrees cooler at night. Extreme temperatures will slow cannabis growth and can cause unexpected plant problems like deficiencies and leaf damage, even if you’re doing everything else right.

Keep humidity around 50% RH throughout the grow (though young seedlings and clones like it a little higher)

Make sure you’ve taken care of air circulation in the grow space and are exhausting hot air. Marijuana plants need a breezy environment with lots of fresh air to grow as fast as possible!

Putting the effort into making a great growing environment will cause plants grow much faster and healthier than they do in sub-optimal conditions!

2.) Get an HPS Grow Light

Use an HPS grow light and put it the right distance away from your plants. HPS lights tend to get the highest grams/watt of any grow light, even compared to LEDs! If you’re not sure what size to get, choose a 600W HPS because it is the most electrically efficient type of HPS.

Use more than one grow light and keep them as close to the tops of your plants as you can. You get the best yields/watt when you have lights sharing space with other lights. You will get better yields with 3 x 600W lights (for a total of 1800 watts) than using 2 x 1000W (total of 2000 watts) because the lights can be kept closer to the plants while also covering a wider space. When you have multiple lights, plants under each light get extra overlapping light from the other lights in the space. If you can fill a room with grow lights, you’ll generally be able to get better yields/watt than someone who’s only working with one grow light, or splits up lights into indiviual tents/rooms.

This grower is already getting amazing yields because they have multiple HPS lights in one room (each sharing their light with all the plants). However, if they switched from 1000W HPS lights to an equivalent wattage amount of 600W HPS lights, they could move all the lamps closer and possibly get nearly the same yields for 40% less electricity and heat.

Beautiful picture by Just Grow It!

3.) Choose a High-Yielding Strain

Choose a large, high-yielding, long-flowering strain. Wonder Woman is one of the highest yielding strains I’ve ever grown, and highly recommended for its potency, but there are lots of amazing high-yielding strains to choose from if you know where to look!

To get the best grams/watt, you want a strain that will actually fill in and thicken up all the buds, like the colas from this Malawi Gold (sometimes called “Chamba”) plant. This strain is legendary for its yields, but most strains will never grow buds like this no matter what you do!

4.) Grow Style

Check on plants daily and understand the basics of growing

Avoid major problems like bugs or deficiencies

You must stay on top of the pH of your root zone to prevent nutrient deficiencies!

Keep plants healthy and growing fast!

5.) Train Your Plants to Grow the Right Way

Grow bigger plants – let plants get relatively big in the vegetative stage before the change to 12/12. Bigger plants can support bigger buds! Wait until your plant is half the final desired height before making the flip to the flowering stage!

Familiarize yourself with plant training. You need a wide enough plant canopy to completely fill the entire footprint under your grow light before you start flowering or you’ll be wasting light. A 600W HPS can cover a 4’x4′ grow space, so in that case you’d want to make sure every inch of that 4’x4′ space is covered in plants. This can be achieved either by growing multiple plants naturally, or growing a couple of plants that have been trained to grow flat and wide. You can fill your space faster with more plants, but it’s more work. If you grow just a couple of plants it’s easier overall but the grow takes a bit longer in the vegetative stage. Learn more about the differences between different types of plant training!

Training plants to grow wide and flat is a free way to get better yields from your grow lights. Once the plants start flowering, a flat canopy creates a “sea” of bud sites like this.

6.) Do These Things Before Switching to the Flowering Stage

Make sure your canopy is flat like a table before you switch to the flowering stage. Learn how.

Make sure each cola has at least an inch or two of air space to itself, but there are also no “holes” in the canopy without a cola.

Clear the bottom 20% of your cannabis plant right before the switch to the flowering stage (“lollipop” your plant) since buds at the bottom of the plant are in shadow and will just take away energy from the top buds directly under the light

Remove the biggest fan leaves on your plant right before the switch to the flowering stage. This is somewhat controversial and should only be done by experienced growers! Learn more about using defoliation to increase yields.

Before – Notice how leafy these plants are; no light can get down past the top canopy and the floor is in shadow. Way-too-bushy plants like this are prime candidates for defoliation

After – Notice how all the bud sites are now exposed, and the light can get to bud sites deeper down into the plant.

7.) Flowering Stage – After switch to 12/12

Keep lights as close as possible without light-burning your plants! Try to regularly check the true color of your leaves in natural light. Sometimes yellowing in the top canopy can creep up on you slowly over a couple of days or weeks if your lights are right on the edge of being too close. It’s important to keep leaves green until you’re approaching harvest because if all your leaves turn yellow your buds stop fattening.

If grow lights are kept too close to plants, the top leaves will turn yellow even if the grow space is not hot. Make sure to keep grow lights the right distance away!

Defoliate the biggest fan leaves on the plant one last time around Week 3 after the switch to 12/12. This exposure to light will help buds fatten up if you remove the largest leaves that are hiding bud sites from the light. Be careful not to go overboard or you’ll do more harm than good! After this step at Week 3, it’s important to avoid defoliating for the rest of the grow as your plant will soon stop making leaves altogether. This is another advanced technique you shouldn’t try on your first grow, if you take too many leaves it will stunt your plant and actually hurt your yields!

Take all the biggest fan leaves around 3 weeks into the flowering stage. Example: the left plant needs defoliation while the right plant was just defoliated. Learn more about why Week 3.

It may seem weird that strategically removing leaves could actually increase your yields, but doing it right will make it a lot easier to achieve 1 gram/watt! Learn more!

There you have it!

If you follow all these steps you can and will achieve 1 gram/watt! It may take a grow or two to get the hang of it in your grow space but it can be done with a little persistence just by following these instructions!

Learn how to achieve the elusive "1 gram per watt" yield with your grow lights by following this tutorial!

How Many Watts Per Square Foot For LED Grow Lights of Grow Room

Growpackage Eco Farm
Oct 7, 2019 · 9 min read

Understanding PAR Output

You’ve probably heard about PAR. In simple terms, It’s the part of the light spectrum that your plants use for photosynthesis. So It’s a pretty big deal. The higher the PAR output of your light, the more edible light your plants receive. Take a look at the table below for the optimal ranges of PAR for each stage of your plans life:

Ideally, you want to pick a grow light that outputs PAR in the ranges above. This pretty much rules out any LED grow light below 300w, as they simply don’t have enough power to generate the required levels of PAR. That said, keep in mind that these are optimal levels of PAR. Using a grow light that has less PAR output than these ranges will not be a disaster, you just won’t max out the potential of your plant.

Consider The Number Of Plants You Are Growing

Sea of Green (SOG) — 1 sq/ft per plant

Sea of Green forces plants into the flowering stage at a very early age.

In fact, after about only two weeks in the vegetative stage you’ll switch the lights to 12/12.

This forces them into flowering so soon you’re able to get more harvests per year — which is one of the reasons people love this technique

After a canopy of buds has started to form, start trimming all the leaves, so the plant spends all of its energy into bud growth.

Screen of Green (SCROG) — 4–6 sq/ft per plant

Screen of Green trains your plant horizontally forming these monster bushes.

If you’re limited on space, growing with SCROG is one of the best ways to make use of what you have.

It works by spreading the tops through a horizontal screen that’s placed above the plants.

Spreading the plant this way encourages bud growth on the branch stems that are normally neglected.

As the plant grows, it will reach for the screen that’s 8–12” above it.

But, instead of letting the plant grow through the holes of the screen, push the tops back through with your finger to make them grow across the screen — try to fill all the empty space!

Induce flowering when the plant has covered 50–60% of the screen for the best result.

Topping — 2–4 sq/ft per plant

Topping has long been a favorite of marijuana growers.

It’s easy and doesn’t require any extra setup.

If grown undisturbed, most cannabis plants will grow one huge top (known as the cola).

The idea behind topping is forcing the plant to grow more than one cola — which translates to more bud!

To top a cannabis plant all you need to do is remove the growth tip and it will split into two more.

You can split two into four, four into eight and so on.

Topping your plants once will turn it into a cannabis bush while topping it a bunch will turn it into an inverted Christmas tree with all the growth at the top of the plant.

Once topped, plants grow sideways more then up allowing you to control the height of the plant.

Low-Stress Training (LST) — 2 sq/ft per plant

Low-Stress Training is training your cannabis plants without the stress that topping or pruning put on the plant.

In case you didn’t know, the intensity of light from a source is inversely proportional to the square distance from the source (This is known as the Inverse-square Law of Light).

LST takes full advantage of this by slowly moving the top of the plant out of the bottoms way so it can receive more light.

More light = more bud.

You need to take your time training your plant to grow laterally, or in a circle around the pot, if you go too fast you can put too much stress on the plant.

To train it, use string or wire tied around plant branches and the planter to keep pressure on the branch while moving it where you want it to go.

Variables that play a major role in determining the number of watts you need per square foot

There are lots of factors that determine how many watts per square foot LED lights that are needed. These variables are:

Type of plants

Different plants vary when it comes to lighting needs. Some plants require more light whereas others require average light. In particular, plants with a canopy require more light so that it would penetrate beneath and, more light means more watts. Examples of high light intensity plants include tomatoes, pepper, and cannabis. Herbs, on the other hand, require average lighting.

Before you can decide on the required wattage it is essential that you first determine the lighting requirement of the plants you are to grow. Inadequate and too much light both affect the output of plants negatively, therefore, you should hit the balance.

Growth phase

Basically, plants have three growth phases germination, vegetative and flowering. In the three phases, the lighting requirements are different explaining why some of the best LED lights have an adjustment button for the various phases.

During germination, plants require less light, this increases when the plants reach the vegetative phase. Flowering is the prime high light requirement for plats. High light intensity is essential for plants to flower and produces big buds.

The number of plants

As much as you want to grow more plants in the marijuana grow tent one thing should be certain. Plants need breathing space and hence should be adequately spaced depending on the type of plants.

The number of plants in the growing area is also a variable essential that should never be ignored when determining the number of watts needed per square foot. The more the number of plants the higher the wattage requirement and vice versa!

Spectrum light

The sun has light spectrums but unfortunately, they cannot be seen with a naked eye. LED grow light full spectrum is, however, visible to the eye. In particular the red and blue spectrums are highly recommended since they are known to support flowering and vegetative.

Light reflectors

The idea of light reflectors is new to most people but this doesn’t mean that it isn’t necessary. For optimal light usage reflectors are essential. When done right, reflectors can reduce the wattage per square foot needed to maximize plant yield.

What is the essence of reflectors in a grow tent? Reflectors are essential in the sense that they reflect and concentrate light on the plants. This is particularly useful given the fact that; walls of most grow rooms are dark and the last thing you want is walls that absorb light meant for the plants.

How Many Plants And How Big LED’s?

Here’s the catch — LED grow lights have specific wattages. For example, a certain model could have 3W, but this will easily burn out when you run the unit at 3W electric power.

You might be enticed by a certain model that brags about 600W. Yes, that’s impressive.

However, it could probably only draw about 240 to 260 watts of electricity to obtain the same effect as a 600W HPS or HID grow light.

Thus, it is best to operate LED grow lights on 60% power. This is also applicable when you follow the 4 square foot per plant rule.

But looking at this table, you’ll see that the power of a LED lighting system increases depending on the size of your grow room and plant density.

Calculating wattage requirement per square foot for LED grow lights

Among all artificial lights, LED grow lights have the highest PAR and have more lifespan. An average LED light runs for 10,000 hrs. To extend the lifespan some companies set the lights such that full capacity is not used. Some lights will be written 5 watts yet only operate on 3 watts. This, however, should not be an issue in calculating how many watts per square foot of LED grow lights since we shall highlight the average requirement per square foot.

On average for a 10 square foot grow area 400 watts is sufficient. The average wattage requirement per foot for LED grow lights is 40–50watts. This is however not standard since different LED grow lights vary some are energy efficient and will use fewer watts for the same kind of lighting. 40–50 watts is just the average standard.

The size of the LED grow light also matters if big this means that it will cover a relatively large area. A smaller grow light bulb will mean that only a small portion will be covered and hence more watts will be needed to illuminate a large area.

How Many Plants Can I Grow?

In general, each cannabis plant you grow requires at least 1sq ft of space. After germination, I like to pot one plant in a large 5 gallon fabric container, which has a diameter of roughly 1 sq foot. My plant will stay in this pot until it flowers.

This allows the plant to grow big and strong without other plants or tent walls obstructing its progress. Using this as a guideline, I would be able to grow between 1–6 plants in my example above.

Most LED grow lights usually be able to cover about 1- 6 plants. If you want to grow any more plans than this, I’d purchase multiple lights to hang side by side ( called daisy chaining ) to cover the canopy and ensure each plant is getting enough light.

The table below shows how the power of grow light you require increases with the size of your grow space. I’ve also included how many plants each size of grow light will be adequate for.

Note: 1 sq ft grow space = 50 watts LED grow light

Would The Height Of A LED Grow Light Impact The Watts?

Absolutely. However, be aware that the distance between the lights and the canopy has an impact on light intensity.

Likewise, using powerful LED grow lights and keeping them in the right distance are some of the ways to achieve bigger yields.

Remember not to keep your LED lights too close to your plants to avoid bleaching, nutrient deficiencies, sunburn, and appearance of yellow leaves.

In reality, there’s no standard distance required to place each LED grow light, but there are recommended grow light height from plants on each growth stage.

Sometimes, the distance may also depend on the model and the brand. Here’s a quick reference you could follow:

Frequently asked questions (FAQ)

How many lumens per plant led lights need?

If plants are placed at 1 plant/sq. Ft. rate, each of the plants need 30w of light energy from LED lights. If the density increases to 2 plants/sq. Ft. or 3/plants/sq. Ft., it will increase at same manner.

How many plants can I grow with a 300w led light?

It depends on how densely plants are placed, and how high the LED light is from the plant canopies. If pants are placed at 1 plant/sq. Ft. rate, you can cover up to 8 plants with a 300w LED light.

How many lights for 12 plants do I need?

If you chose to buy a 120w light for a grow space of 1 plant/sq. Ft. rate, you will need 3 lights to cover it up. If you chose to buy 180w lights, you will need two of them to serve 12 plants.

how many 600w lights for 10 plants do I need?

600w taken as the ‘actual’ wattage served by the light, you don’t need more than one 600w light for 10 plants, if plants are planted at 1 plant/sq. Ft. density. Even for some crops, a 600w light source can be more than what they need.

You’ve probably heard about PAR. In simple terms, It’s the part of the light spectrum that your plants use for photosynthesis. So It’s a pretty big deal. The higher the PAR output of your light, the…