growing peyote from seed

The new home of Lophophora Williamsii
and its closest friends

Propagation of Lophophora

Propagation is through seed, or cuttings which can be accelerated by grafting.
In the wild, peyote will take fifteen to twenty-five years before reaching a point of flowering maturity. If conditions are controlled to that of optimum, these same plants can grow to a point of flowering maturity within two to three years or less. And if one wishes to really speed up the process of growing mature plants from seed, then grafting is the way to go. If one starts out by grafting one, two, or three month old seedling, it is possible to get flowers that produce viable seed about six months later.

How do I know? From personal experience. In fact, I have personally been able to achieve a flowering plant from seed by grafting within seven months of planting the seed. The same plant put out its first fruit with seed by its tenth month. For those that are a little nervous to try their hand at grafting or just prefer a hard grown plant from seed I also have good news. When proper conditions are offered one can have a plant flowering within as little as one year and a half, just as in the picture you see here below. This batch of Lophophora Williamsii was planted December 14th 2006, and put out its first flower by June 11th 2008. If I can do this, I am sure that anyone with the desire to grow such a beautiful plant can too. and that means you!!

The most important things to understand are that seed fertility, moisture, temperature, soil mix, and light all affect seed germination.

Soil conditions for the cultivation of peyote are not too critical. The natural soil for peyote is of limestone having a basic pH from 7.9 to 8.3., so one should provide adequate calcium (limestone chippings are best if available), and most importantly provide good drainage. There are many combinations possible when making peyote soil. Sand, peat, limestone, blood meal, bone meal, potting soil, bat guano, rabbit shit, vermiculite, perlite, and polymers are commonly used. Doesn’t make much difference so long as there is no extreme condition created causing such things as nitrogen burn, saline dehydration, or mud, so long as you provide for excellent drainage. Most of my friendly clients ask what my specific mix is in order to match it if they can so here it is, but you don’t have to follow it exactly. Before I offer it you must know that this mix is for any and all cacti I grow once they pass the first stage of repotting after the seed tray. All my seedlings are germinated in “Premier” Pro Mix for seedlings. Now here you go:

My Own Special Cactus Mix : I use one part quarter chip gravel, one part quarter chip limestone screenings, one part mid ph pumice, one part perlite, and one and a half parts earth worm casings. For those that don’t want to spend very much money a decent mix that should do well is taking any bag of commercial cactus soil and adding fifty percent perlite to improve drainage and prevent hardening of the sand added in such mixes.

All cacti (especially cuttings) need a low nitrogen, high phosphorous fertilizer to stimulate root development and proper tissue consistency. Although high nitrogen will dramatically increase growth rate, the cacti could swell, split and or become hollow. During the fall and winter such plants have a lower survival rate because they’ll be unable to “harden off” against the cold.

Seeds should be as fresh as possible, although seeds that have been kept in a cool environment have been known to keep for years. Seeds may lay dormant for years and still remain viable if kept dry and away from light. However, fresh seeds are more likely to be vital and should be planted as soon as proper conditions are available. Seed fertility, moisture, temperature, soil mix, and light all affect seed germination. Seeds should be started in lidded trays, or in small pots covered by a sandwich bag.

Lophophora Williamsii Seed Growing Instructions

1 – Fill seed trays or small pots with compost mix and flatten mix down gently. (Any seedling mix purchased at your home and garden centre will do. Premier” Pro Mix found at Rona is one of the best.)
2 – Soak the compost using boiling water to kill parasites. Once soaked, allow to drain and cool for about an hour. Then press down on seedling mix with the back of a spoon to make sure water does not pool. if so it still has to drain more unless you can press some out.
3 – Sprinkle seeds evenly over the compost mix, and then gently press seeds down and level with top of mix using the back of a spoon.
4 – Cover with seed tray cover, or enclose pots in zip lock plastic bags.
5 – Place under grow lights or in a well lit window but not in direct sunlight as this could scorch your seedlings. Temperature should reach above 80(26 degrees C) to 110(43 degrees C) degrees F during the day, and must dip below 80 at night for best germination results.
6 – If pots are placed in zip lock bags water might not be needed for months. If seed trays begin to dry out, spray to moisten the surface.
7 – Seeds should germinate within 2 to 14 days.
8 – When seedlings are about four to six months old begin acclimatizing by lifting tray covers or poking holes in zip lock bags for two to three days.
9 – Keep seedlings in indirect sunlight for about six months, and then slowly let them have more light. Seedlings should have a lush green color if the light levels are right. If the epidermis turns red it means they are getting too much light. If so raise lights or shade window with appropriate material possibly cheese cloth.
10 – Be in no hurry to repot your seedlings. Lophophora enjoys the company of others, so wait until they are really fighting for room. They will be ranging in sizes of between one and two centimeters in width, or if you prefer no bigger than half an inch.

Seedlings will germinate in two to ten days, but can and have germinated in as little as twenty four hours. Initially they’ll appear as little green balls wearing shiny black hats, but a trained eye will soon notice the cotyledons and first set of areoles.

Extra Growing Information for the Real Enthusiast

Lights – I keep my lights on using timers. Nothing elaborate is needed. Lights should be turned on for twelve to sixteen hours a day.

Temperature – Most plants seem to like fluctuating temperature, and Lophophora does as well. If the temperature is either to hot or too cold seeds will not germinate. Lophophora seems to bear temperatures between 5 and 55 degrees C. For germination purposes I have found that a day time temperature of anything from 30 to 41 degrees C works very well, so long as the night time temperature does decrease. Night time temperatures should drop lower than 25 degrees C. There seems to be a cross over between day and night time temperature that actually cause the seeds to sprout, and unless this cross over is met most of your seeds will not germinate.
Also, in the wild Lophophora exhibits a wide range of aridity, with only between 64.0 and 394.0 millimeters of rain per year.

Adult Peyote plants can tolerate temperatures within a range of 45-130 degrees Fahrenheit. If soil is kept dry, it can survive temperatures as low as 30o F. Frequent watering and a shade cloth will protect it from temperatures exceeding 120 degrees F. Peyote is very sensitive to frost or prolonged near freezing temperatures and is easily injured or killed by frost. It should be brought inside in locations where the temperatures drop below 40 degrees F.

Water – In the growing season, I water my plants twice a week on a regular basis. Some might think this excessive but my plants are robust and very healthy. I also add a very light fertilizer with every watering.
Your watering frequency will be dependant on two factors. the intensity of light provided and the temperature at plant level. These two factors will govern evaporation to a certain extent. Plants should not be watered again until the median has been dry for two to three days. Once plants need a drink they become a little softer when you give them a little squeeze. A day or two after plants have had a good drink they get nice and hard to the touch.

Increasing The Alkaloid Concentrations
One of the main defences of cacti is to increase the production of protective alkaloids in response to numerous external stresses. The growing cactus plant can be “stressed” in a number of ways to help increase the concentration of alkaloids prior to harvest. It should be noted that, since cacti have a slow metabolism, it may take an entire growing season of stress to significantly affect alkaloid levels.
Here are some of the most common and widely tested methods:
Shade: There have been several reports that leaving live (or cut Trichocereus) in the shade for several months prior to harvesting to increase the percentage of alkaloids in the tissues of the plant. It is also common in Mexico and South America to leave cut cacti in large covered stacks for some time prior to being sold. There may be a good reason for that practice.
Excess Sun and Heat: Too much Sun or heat will most definitely stress a live cactus. It must be realized however, that increasing the alkaloids through stressing will greatly affect the plants growth rate, and might just kill it. Cactus can and do get sunburned, which can be fatal.
Nutrient level variations: Different formulas of fertilizers will affect the growth rate, and therefore the alkaloid mix and percentages. Very high nitrogen levels in the soil would help to draw water out of the cactus, and promote stress. Use caution as too much nitrogen will burn your plant. Remember though, a fast growing cactus is also lower in alkaloids per volume.
Watering stress: Depriving the intended victim of water is the most widespread method of trying to increase the alkaloid content. Many people advise to buy your cactus at least one growing season in advance, and then let them sit, without water, until they are ready to harvest. The new home of Lophophora Williamsii and its closest friends Propagation of Lophophora Propagation is through seed, or cuttings which can be accelerated by grafting. In

The Garden of Eaden

For growing plants, beautiful gardens and propagation


How to grow Peyote from seeds

The Peyote is a small, slow-growing cactus from the desert regions of Mexico. It is a popular choice with collectors not just because of its ornamental value but also for its psychoactive properties. While slow to grow they are relatively easy to germinate from seed, just so long as you can sufficiently replicate their native habitat.


They are usually found in calcareous deserts, on rocky slopes, or in dried river beds, so when making creating a suitable seed compost mix make sure that is is extremely well-drained.

Consider using a 50:50 ratio by volume of John Innes seed and grit-sand. The peyote has evolved in alkaline soils so avoid using a peat-based or ericaceous composts, or for that matter lime-free grits or gravels.

While adult cultivated plants have a history of being susceptible to root rots if kept too wet, their seeds in the wild usually germinate during the hot September- October rainy season. So as you can imagine you will need to provide hot and humid conditions to encourage germination.

First, soak the seeds in warm water of approximately 25-30 degrees Celsius for a couple of hours. Then using a large modular seed tray (large modules not large tray) fill with the compost and tap to settle it down. Water in and allow the excess to drain away. So the seed at a rate of one seed per module. Peyote seed will need the presence of light to germinate so do not bury the seed into the compost, just press it into the surface to that it has good contact with the surface. If you like you can apply a thin layer of vermiculite onto the surface.

Peyote seedlings

Place the tray inside a heated temperature with the vents closed and at a temperature of between 25-35 degrees Celsius. Be aware that better germination rates will occur if you can provide lower night temperature of between 15-25 degrees Celsius.

The propagator will need to be kept in a position where it will receive as much bright light as possible but avoid direct sunlight as this can overheat the seeds or dry out the compost. Alternatively you can consider using fluorescent tube lighting for approximately 16-18 hours a day. To prevent the compost from drying out and to help maintain a humid atmosphere water the compost regularly using a mist sprayer. You can expect the seeds to germinate within 2 to 14 days.

Once the seeds have germinated maintain the damp, humid conditions for a further 4 weeks, after which slowly reduce the humidity by less frequent watering and from progressively opening the vents. After a few more weeks you can completely remove the lid, but still keep the soil warm and moist for a further 8 weeks. Continue to keep them in indirect sunlight but once they reach about 12 months old you can pot them on into individual pots and begin to slowly harden them off to direct sunlight. Peyote seedlings should be a healthy green colour if you have been hardened off to the appropriate light levels. If the stems start to turn a red colour then this may be an indication the the seedlings are getting too much light too quickly. If so either move the seedlings to a site with lower light levels or apply shade to the windows where they are.

The Garden of Eaden For growing plants, beautiful gardens and propagation HOW TO GROW PEYOTE FROM SEEDS How to grow Peyote from seeds The Peyote is a small, slow-growing cactus