gorilla glue white vs brown

Gorilla Glue Vs Super Glue Vs Krazy Glue


Gorilla glue Vs Super glue Vs Krazy glue – which one is the best?

Well, it?s a moot point. Nevertheless, I?m not going to sit on the fence here.

In this article, I?m going to discuss in detail about Gorilla glue uses with pros and cons, Krazy glue uses with its upside and downside, and Superglue uses and its pros and cons too.

Then I will compare them based on the application, price, curing time, etc.

Later, I will answer a total of fifteen frequently asked questions to clear the air for you.

Then let?s begin with the Gorilla glue uses.

Gorilla glue Vs Super glue Vs Krazy glue

Table of Contents

Gorilla Glue Uses

Gorilla, as a brand, has earned a reputation as a quality glue manufacturer. No wonder, Gorilla is not limited to only one type of adhesive. Instead, it makes several glue types.

Here, I?m going to discuss some of its most popular glue types and its uses.

Original Gorilla Glue

It?s the first version of the Gorilla glue that you can use on several materials, including wood, foam, metal, ceramic, glass, etc.

Clearing the surface and making it dust free, dampening the surface with water, applying the glue correctly, and clamping the surfaces are few necessary steps to get the best result from this glue.

Clear Gorilla Glue

It?s another versatile glue type that you can apply on various materials like glass, ceramic, stone, wood, foam, etc. With that said, it?s best to use clear gorilla glue for bonding between transparent materials like glass.

It?s non-foaming, crystal clear, water-resistant, and strong glue.

Lightly dampen the surface with water, applying a thin layer of glue, and clamping the two surfaces are the recommended steps to get the best result.

Gorilla Wood Glue

As the name suggests, this PVA glue is mainly made to target the woodworkers so that gluing two wood pieces becomes as easy as pie.

You can apply this glue on all types of wood, including woodworking projects in the kitchen.

Remember, use this glue only for wood to wood bonding. Making sure it?s above 55-degree Fahrenheit when applying the glue to get the best bonding.

Cleaning and drying the surface, aligning wood grains, and applying the glue on one surface are the simple ways you need to follow.

Gorilla Super Glue

It offers high-strength and quick set time that makes it a perfect adhesive for household projects.

Gorilla offers its superglue in four different formulas.

It?s a multipurpose glue. Therefore, you can use it on a variety of materials like wood, metal, ceramic, rubber, paper, shoes, etc.

Cleaning and drying the surface, using a small amount of adhesive on one surface, are required to get the optimum results.

Gorilla Epoxy

Gorilla epoxy is an ideal two-part adhesive for tough projects. It features two easy to use syringes.

The two parts (the resin and the hardener) are combined to make a strong bond.

Clean and dry the surface, mix the two parts perfectly, and apply the glue within three minutes of mixing. Then clamp the surfaces for 30 minutes. You are done. Let it adequately cure for 24 hours.

Gorilla Glue

  • In general, Gorilla glues are cost-effective.
  • Most of the glues are versatile.
  • The glues offer strong bonding.
  • Easy to apply.
  • All the glue types come inside a quality container.
  • Take longer than expected time to cure fully.
  • Not so suitable for bonding plastic.
So here’s our recommended Best Gorilla Glue:
  • Incredibly strong and versatile; The leading multi-purpose waterproof glue
  • Best for tough repairs on dissimilar surfaces, both indoors and out
  • 100% Waterproof; Doesn’t break down when exposed to outdoor elements
  • Versatile; Easily bonds wood, stone, metal, ceramic, foam, glass, concrete and much more!
  • Incredibly Strong: Expands 3 times into the materials to form an incredibly strong bond
  • Impact Tough: Reinforced to increase impact resistance and strength
  • Smooth Application: Precise, controlled dispensing tool that fits comfortably in hand
  • Fast Setting: Dries in 10-45 seconds, no clamping required
  • Versatile: Bonds plastic, wood, metal, ceramic, rubber, leather, paper, and more!
  • Bonds virtually everything: wood, stone, metal, ceramic, foam, glass & more
  • Crystal clear
  • Non-Foaming
  • Water resistant
  • Incredibly strong and easy to use

Krazy Glue Uses

Like Gorilla, Krazy offers several types of glues. It?s best to classify the Krazy glues based on the applicator types. So, here are the types of Krazy glue based on the applicator –

  • Gel
  • Brush
  • Precision
  • Pen
  • Tube
  • Single-use

Of course, Krazy released multiple versions under each of those types.

Let?s talk about the use of some of the popular Krazy glue.

Gel Based Krazy Glue

You have the option to choose from five different gel-based versatile Krazy glue. All the gel-based glues have an easy to use a nozzle. The no-drip formula makes it easy to control the amount of adhesive you want to apply.

You have the no-run all-purpose gel glue that you can use on ceramic, wood, plastic, glass, metal, leather, rubber, vinyl, etc.

The Maximum Bond Krazy glue gives you extra strength and shock-resistant bond. While you can use this glue on several materials, it works best on porous materials like ceramic.

You have the craft no-run gel with skin guard that is also an ideal adhesive for filling gaps of materials like ceramic. Nonetheless, you can use it for wood, plastic, glass, metal, leather, etc.

Krazy skin guard gel is perfect for mismatched surfaces. On the other hand, home and office no-run gel are ideal for home and office use. It is suitable for both mismatched surfaces and porous materials.

Brush Based Krazy Glue

Here, you have the liberty to go for four different brush-based Krazy adhesives. The brush applicator lets you reach the tight spaces easily and cover large surfaces with ease.

The All-purpose brush-on version is ideal for applying on various materials, including wood, metal, ceramic, leather, glass, rubber, vinyl, etc. So, it?s a handy option for household use.

Like the gel-based version, Krazy releases a specialized home and office brush-on version, too featuring the same application.

The color change brush-on version turns into purple when dries. The skin guard brush-on glue is there to be used on various materials as well.

Precision Based Krazy Glue

This type of glue comes with a hanger cap for secure storage. It has a precision tip which is an extended no-clog tip that reaches to the tight spaces quite quickly. The finger grip size makes it easy to control the amount of adhesive you want to apply.

Here, you are getting two different models – Maximum bond with an extended precision tip, and the other one is the craft with skin-guard. The latter is an ideal solution for craft materials like wood, ceramic, porcelain, etc. The maximum bond one works great on various materials.

Pen-based Krazy Glue

For the delicate repairing purpose, this type of pen applicator is one of the best options for you. Krazy?s pen-based glue features a push and glue-based pen applicator that?s easy to control.

Here, you will have two different models – the all-purpose Krazy glue pen, and Krazy home & office pen.

The home & office pen is suitable for home and office where you require accuracy. You can easily store the glue in your office drawer. You can use it on various materials like wood, ceramic, plastic, metal, vinyl, etc.

The all-purpose pen glue offers the same application and use.

Tube Based Krazy Glue

You guessed it right. This time you are going to get glue inside an easy to use tube.

The tube has a handy nozzle that makes it a perfect option for the porous surface.

This time you have five different versatile types of glue that you can apply on various materials like wood, glass, ceramic, metal, leather, vinyl, etc.

Single-Use Krazy Glue

These single-use glues are useful for a quick fix. You can go for the single-use glue when you need only a small amount of glue to fix something quickly.

This version of Krazy glue saves your money as you don’t have to buy the big size ones unnecessarily.

All the single-use glues come with a storage box. They are small in size and easy to use too. The application and use are the same as the other type of adhesive.

Krazy Glue

  • Krazy offers different types of applicators to make life even easier for various applications.
  • All the glues are easy to control and use.
  • They are convenient to store.
  • All of them give you a strong bond.
  • They are cost-effective.
  • All the applicators serve their purpose well. Notably, these are some excellent glue for precision bonding.
  • Curing time is not so quick.
So here’s our recommended Best Krazy Glue:
  • Maximum-strength formula sets fast and delivers a durable, shock-resistant bond
  • Ultra-thick, no-run gel is great for vertical surfaces and difficult, mismatched surfaces
  • Designed to withstand impact and changes in temperature – ideal for objects used every day
  • Extended tip makes it easy to get the super glue into tight spaces
  • Bonds to a variety of porous and non-porous surfaces including ceramic, plastic, porcelain, metal, rubber and vinyl
  • Xoffice supplies
  • School and art supplies
  • Elmer’s works great on wood, rubber, glass, ceramic, and plastic
  • Elmer’s works great on wood, rubber, glass, ceramic, and plastic

Super Glue Uses

Well, generally, superglue is a type of adhesive that offers high-strength bonding. Super glue is made from cyanoacrylate.

Interestingly, like Gorilla, Krazy, Loctite, and some other brands, a brand named Super Glue also makes this type of glue.

Don?t get confused.

Super glue is a brand name, as well as a glue type.

Regarding the application and use, super glue is applied to all sorts of materials like the other two brands I?ve discussed above.

As a brand, SuperGlue manufactures different types of versions of the super glue. They make gel type, liquid, epoxy, and the traditional super glue.

Super Glue

  • It offers a high-strength bonding compared to other types of adhesive.
  • Superglue dries relatively quickly.
  • It?s a multipurpose type of adhesive
  • All the brands, including the Super Glue brand, offer easy to use a container with a handy tip to use the glue with ease.
  • It can make a mess if you are not careful enough while applying it.
  • The fume produced by the superglue is pretty sharp, and not suitable for health.
So here’s our recommended Best Super Glue:
  • Original Super forms the strongest bonds on clean breaks of non-porous materials
  • Super Glue for wood, ceramic, fingernails, metal, pottery, plastic, china, jewellery, and more
  • Fast-drying formula bonds instantly and sets in 10-30 seconds; paintable and sand able
  • Precision applicator eliminates runs and drips
  • Reusable storage comes with 12-Count 2-gram tubes (24 grams total)
  • Rubber-toughened, instant adhesive resists impact, shock, vibration and temperature extremes
  • Ideal for metal, rubber, ceramics, wood, leather, paper and plastics
  • Comes in a patented, side-squeeze design for maximum control and airtight storage
  • Glue dries Clear and sets without clamping
  • 0.14 fl oz.; 1 Each
  • Bonds Instantly
  • Precision Applicator
  • Self Piercing Cap
  • Works Best on Clean Non-Porous Surfaces

Gorilla Glue Vs Super Glue Vs Krazy Glue – Which One is the Best?

Let?s first talk about Gorilla glue vs. Krazy glue.

Gorilla glue offers a wide variety of glue types than the Krazy glue. On the other hand, Krazy glue focuses on different applicator for precision work.

If it?s about merely repairing something, then Krazy glue is the best bet for you. For massive works like construction, the Gorilla is the perfect option for you.

Cleaning up the excess glue is more comfortable in case of the Krazy glue than the Gorilla glue.

The curing time required for each of the brands is almost similar. It takes about 24 hours for both brands. However, Gorilla glues are slightly quicker in curing than the Krazy glue.

On the other hand, super glue makes strong bonding relatively quicker than the different types of adhesives.

For single-material bonding, Superglue and Krazy glue works well. For different material bonding, the Gorilla glue is ahead of the other two.

Regarding price, both of these brands are cost-effective. Both of the brands feature easy to use the container.

Frequently Asked Question (FAQs)

Question #1. What is super glue made of?

Answer: Super glue is made of ?Cyanoacrylate.? Cyanoacrylate is used as a strong adhesive, which is a composition of acrylic resin.

This type of glue is responsible for making a strong bond by transforming to plastic after curing.

The industrial name of these Cyanoacrylate adhesives is ?super glue? or ?crazy glue.?

Question #2. Is Gorilla glue the strongest glue?

Answer: It entirely depends on the application.

When it?s about making a bond between two similar types of materials like plastic to plastic or metal to metal, Gorilla glue is NOT the best solution. Super glue performs better than Gorilla glue in this case.

However, when it?s about making a bond between two different types of materials, Gorilla glue makes the strongest bond.

Question #3. What is stronger than Gorilla glue?

Answer: While Gorilla glues are one of the strongest glues, at the same time, it is NOT more potent than the strongest when you try to bond two similar materials.

For example, when it?s about making the most durable bond between metals or between plastic, the super glue performs best.

Question #4. Is there anything better than super glue?

Answer: It depends on the material you are applying the glue to.

If you are trying to glue up two similar types of materials like plastic to plastic or metal to metal, then super glue is the best option for you.

Here is the list of materials where super glues work best –

  • Metal
  • Plastic
  • Canvas

So, yes, there are some other glues that work better than superglue in some cases. For instance, when it?s about making a bond between two different materials, Gorilla glues work best.

Question #5. How fast does a Gorilla glue set?

Answer: The original Gorilla glue requires 60 minutes of clamping to set things up. The clear Gorilla super glue dries in about 10 to 45 seconds. The epoxy takes 5 minutes to set. The wood glue requires 24 hours to cure fully.

Question #6. What is super glue good for?

Answer: Super glue is quite a popular type of glue out of many other types of glue. When it?s about making a strong bond between metals, plastics, leathers, etc. super glue is second to none.

It is used for woodworking, auto repairing, shoe repairing, tools handle fixing, or fixing broken pieces of furniture, etc.

Question #7. Can you use Gorilla glue on glasses?

Answer: Yes, you can use Gorilla glue on glasses. The rubber particles that are used to make Gorilla glues give a strong bond while applying on glasses.

Question #8. How long does it take for Gorilla glue to dry?

Answer: The fully curing time for all types of Gorilla glue is almost the same. It?s for 24 hours.

However, the initial drying time depends on the particular type of glue. For example, the wood glue takes 20-30 minutes of clamp time. On the other hand, the Gorilla super glue takes 10-20 seconds to dry.

Question #9. How strong is Gorilla Glue?

Answer: The wood glue makes a strong bond for wood to wood. The other ones are also strong adhesives, particularly when you need to bond two mismatched surfaces.

However, Gorilla is not the best of the best solution for using plastic.

Question #10. Does Gorilla glue work on metal?

Answer: Yes, it does. Gorilla Weld is the one that you should go for in this case.

Question #11. Where to buy Gorilla Glue?

Answer: Gorilla is a famous brand. So, you can find it at almost any shop. If you want to buy online, sites like Amazon or Gorilla’s website are the places you should browse.

Question #12. Is Gorilla glue toxic?

Answer: Yes, like several other glue Gorilla glue is also toxic. That?s why it is recommended to keep the glue from children and animals. Don?t let it come in touch with your eyes, and don?t try to smell the glue intentionally.

Question #13. How long does super glue take to dry?

Answer: Super glue takes comparatively less time to dry. 10-20 seconds will be enough to let it dry.

Question #14. Is super glue waterproof?

Answer: In general, no. At best, superglue is water-resistant. However, you will find some specially made super glue that is waterproof.

Question #15. Is super glue conductive?

Answer: No. No cyanoacrylates (CA) glues are conductive. Super glue is a CA glue. It?s a polymer-based formulation. Therefore, it?s not conductive.

Question #16. Does super glue work on wood?

Answer: Super glue is not an ideal solution for using on wood. Nonetheless, it works, but you won?t get the best result. Gorilla wood glue and some Krazy Maximum bond glues are suitable for working on wood.

Question #17. Does Super glue work on glass?

Answer: It?s not suitable to bond something on glass. However, it?s quite ok to use super glue for filling the gap between two glasses if you can exclude the air ingress.

Loctite glass glue is the best super glue to work on glass. It?s particularly made to work on glass properly.

Question #18. Is Krazy glue waterproof?

Answer: In general, yes, most of the Krazy glues are waterproof. It depends on the glue type, though. Some Krazy glues are water-resistant only.

Question #19. Is Krazy glue toxic?

Answer: According to Krazy, its glues are made from ethyl cyanoacrylate, which is non-toxic. With that said, it?s not a wise decision to be careless about any adhesives. Always better to remain cautious.

Question #20. How to open Krazy glue?

Answer: Krazy glue offers various versions of their adhesives based on the type of applicators, including gel, brush, pen, tube, etc.

The applying procedure is not the same for all types. Don?t worry; it?s quite easy to open every kind of Krazy glue.

Basically, except for the pen glue, the other variety of adhesives use the same sort of cap. You just have to open that cap to use the glue ? nothing complicated here.

Question #21. How long does it take for Krazy glue to dry?

Answer: Krazy glue will dry within 10-30 seconds. However, you might need to let it dry for a whole day to cure it entirely.

Question #22. Does Krazy glue work on plastic?

Answer: The company doesn?t recommend using Krazy glue on foam, paper, rearview mirrors, polyethylene, Teflon, or other fluorocarbons.

Except for those, Krazy glue works on everything, including plastic.

Final Words

Gorilla glue Vs Super glue Vs Krazy glue.

I hope this isn?t an unclear topic for you anymore.

Now, you know the differences among them, their application, using instruction, some other facts like curing time, etc.

Different glue is best for various purposes. Therefore, you can?t consider a particular one as a winner here.

Gorilla glue Vs Super glue Vs Krazy glue – which one is the best? We have described the types with uses and answered 15 frequently asked questions.


northern auto

  • Post author

By Admin
Post date

Northern Automotive Systems Ltd

Northern Automotive Systems is a world leader in the manufacture and supply of decorative aluminium trim for the automotive industry. With a history dating back to 1908, we have mastered the art of transforming a concept into reality. Our ultimate focus is to produce innovative and unique decorative aluminium trim for the automotive industry.

Since joining the Huaxiang Group in early 2012 the company has become part of a global structure allowing us to meet the needs of customers all over the world. We now have the ability to manufacture wood veneer, allowing us to provide a complete range of interior options for our clients.

Recent News

NAS nominated on new Volvo Programme
NAS nominated on Range Rover and Range Rover Sport 2018 Model Year Vehicles
NAS Wins New Land Rover Contract
NAS Fundraising in the Local Community


Ultramodern aluminium coating and printing facilities allow us to create innovative designs and deliver a quick turnaround.


We understand the importance of a smooth transition from concept design through engineering into high volume production.


We are determined to minimise our impact on the environment in an appropriate and cost effective manner. We aim to ensure that environmentally responsible standards and practices are adopted.

Northern Automotive Systems is a world leader in the manufacture and supply of decorative aluminium and wood trim for the automotive industry.

screen for pipe weed

  • Post author

By Admin
Post date

Pipe Screens: Are They Worth It? [Ultimate Guide]

At the end of the day, I think it is safe to say that all Stoners are looking for a smoother smoking experience, particularly one without Scoobies. You know, those terrible little bits of ash that get sucked through your hand pipe and into your mouth? Yeah, those are fun!

Furthermore, we all like to keep our hand pipes clean. Believe it or not, there is a tiny little device that you can purchase for dirt cheap that helps to accomplish both of these things – pipe screens. That’s right, pipe screens for hand pipes help you to keep resin from accumulating in your bowl, which makes for pesky clogs, and they also help protect you from Scoobies.

In this guide, we will outline everything you need to know about pipe screens, including:

Let’s get started!

What Are Pipe Screens?

Pipe screens are small screens used to prevent clogging, pull through, and resin buildup in hand pipes and glass bowls. They are typically made from stainless steel, but can also be made from brass, glass, quartz, and even titanium. There are tons of different sizes and designs of pipe screens, depending on your preferences.

Why Use a Pipe Screen?

Put simply, pipe screens make your life easier as a Stoner. They allow ash to pool on top of them, and can easily be removed to kick an entire bowl pack. On top of that, they help to prevent against Scoobies, and also help to keep your hand pipe clean for longer periods of time.

Do You Need A Pipe Screen?

No. Many Stoners get by without one every day. However, once you enjoy the convenience of smoking a hand pipe with a pip screen, it may be hard for you to go back to your more savage smoking habits.

How Do You Use Pipe Screens?

To use a pipe screen, follow these simple steps:

  1. Clean out your hand pipe or glass bowl – You want to make sure that before you place your pipe screen in your hand pipe that there is no ash or herb beneath it.
  2. Make sure you have the right size pipe screen – You also want to make sure that the screen you are using fits your bowl or pipe well. Screens that are too small will fall right through the hole, causing clogging and other problems. Screens that are too large will sit too high in your bowl, causing them to be loose, and also not allowing you to pack it completely.
  3. Pack your herbs on top – Gently pack your bowl the same as you normally would, just with the screen pipe on the bottom.
  4. Smoke it – Smoke your hand pipe or bong like you usually would, until all of the herbs are gone or turned to ash.
  5. Kick it – Gently remove the pipe screen once you are done smoking. Give it a shake to remove the ash from it. Then place it back in your bowl if you plan on using it again.
  6. Reuse or clean your pipe screen as needed – If your pipe screen seems clean, you are good to use it again. If it seems to have some resin buildup in it, you can always choose to clean it, or get a new one.

Because pipe screens are so cheap, a lot of stoners opt to purchase new ones rather than clean old ones. No need to be wasteful, cleaning your pipe screen is very easy. We will explain this process later in this article, so you can save money and save the Earth!

3 Different Types of Pipe Screens

There are a few major types of pipe screens that you will commonly come across while browsing online:

  • Glass
  • Brass
  • Stainless Steel

These are generally considered to be the best types of pipe screens because they are durable, easy to clean, affordable, safe to use, and do not have any sort of noticeable effect on taste.

There are also titanium pipe screens, but they are known to have negative effects on the taste, much like titanium nails.

Let’s take a look at each of these types of pipe screens, what makes them different, what we like about them, and which one we recommend.


Glass pipe screens are often made into funky shapes such as flowers or animals. Generally speaking, they are known for being:

  • Very easy to clean
  • More expensive than other types of pipe screens
  • Less durable than other pipe screens
  • Easier to clog
  • The best pipe screen for airflow
  • Versatile, able to fit all sizes of hand pipes and bowls

Overall, glass pipe screens are great for certain Stoners. We like them because as long as you treat them right, you will only ever need one.

So, even though they cost more upfront (only about $3-5 more for 100), they last a lot longer, and they also add a bit of decorative flair to your piece – if that is something you are interested in.

If you are a clumsy Stoner, this may not be the best type of pipe screen for your hand pipe, considering that one drop will almost always break it.

However, where glass pipe screens really excel is in terms of taste. Unlike metal screens, they have no noticeable effect on the taste of your smoking experience, which is very important to some smokers. This change in taste from metal screens comes from the fumes they emit when heated, which are also a cause for health concerns. Overall, glass pipe screens are the safest alternative.


Brass pipe screens are generally the cheapest type of pipe screen (though they are all dirt cheap). They are known for being:

  • Very affordable
  • Not as long lasting as the other types of pipe screens
  • More durable than glass
  • Available in many different sizes

Overall, brass pipe screens are the middle of the line. At the end of the day, I can’t see an argument as to why you would choose brass over stainless steel or glass. It’s not that they are bad, but they are noticeably less durable and long lasting than stainless steel, and are barely cheaper, if at all.

Sure, they look great with their golden-brass coloration, and they definitely get the job done, but it is hard to imagine why anyone would choose them over glass or stainless steel.

One thing you need to be careful about with brass pipe screens is that over time, they become weakened by the heat of your pipe. This can lead them to have larger holes in the center over time, or in some cases, cause them to crumble altogether. You want to make sure that if you use brass pipe screens more than once that you periodically check their durability to make sure they are still safe to smoke. The last thing you want is to be inhaling brass.

Stainless Steel

Stainless steel pipe screens are by far the most popular type of screens on the market. They are known for their:

  • Very affordable prices
  • Large quantities
  • Numerous sizes
  • Durability over brass screens

Overall, stainless steel pipe screens get the job done. They noticeably more durable than brass screens in the long run, and they also seem to have a far smaller effect on taste.

Just like brass pipe screens, stainless steel can become weakened by the heat over time, causing larger holes to develop and eventually causing the screen to crumble. Be careful when using screens multiple times and make sure to check their durability to keep yourself safe while smoking.

Are Brass Screens or Steel Screens Better?

Overall, from my personal experiences, and from the experiences of dozens of other seasoned Stoners, it seems that stainless steel screens are the victor in this battle. They are more durable, more affordable, come in more sizes, and also have a smaller effect on flavor – everything that should be important when looking for a pipe screen.

What Are the Best Pipe Screens?

We always recommend glass pipe screens because they are very long lasting, easy to clean, and they have no effect on the taste of your smoking experience. On top of that, they offer the ability to customize your bowl or hand pipe a bit more, which is always nice. Lastly, as long as you are responsible, you should be able to make a single quartz screen last longer than about 100 stainless steel screens.

3 Best Pipe Screen Brands

In terms of which brands of pipe screens are the best, there are a few we prefer over the rest:

  1. Daisy Screens – These guys make some awesome glass pipe screens that are shaped like colored flowers. You can get a 100 count for under $10, which should be more than you will ever need.
  2. USA Made – These guys make some of the best stainless steel pipe screens right here in the USA. Very durable screens, lots of sizes, and also affordable prices.
  3. GRIMM – These guys make some of the best brass screens in the world. They offer tons of sizes, a durable design, and affordable prices.

Overall, I wouldn’t focus so much on brand, after all, they are just screens, not bongs. However, if you want something you can depend on every time, these are the best pipe screen brands for you.

Are Pipe Screens Safe to Use?

First of all, before answering this question, let’s acknowledge the fact that smoking anything is not healthy for you. Inhaling carcinogens in any amount can lead to cancer, lung disease, and hundreds of other health complications later in life. No amount of screening or filtration can completely remove the risks associated with smoking.

Now that we got that out of the way, if safety is your concern when purchasing a new pipe screen, a glass screen is definitely the best option. Any metal, no matter how strong, durable, or safe, releases fumes when it is heated, even at low temperatures. Both brass and stainless steel screens have been known to do this, which is why they tend to affect taste. This raises health concerns that have yet to be answered by regulators and corporations.

Overall, there are no warnings that explicitly tell people to not use brass or steel pipe screens, or that claim they are unsafe. However, all we can do is use the pieces of information available to us to come to a conclusion. At the end of the day, using a metal pipe screen is probably not going to make a very noticeable negative impact on your health. But over time, it could add more chemicals to the equation – whereas using a glass pipe screen eliminates this concern completely.

How Do You Clean a Pipe Screen?

If you’re anything like us, or most Stoners, you want to make the most of what you’ve got. This usually means cleaning out that old bong or hand pipe and making it good as new, or conserving every last crumb and pipe screen in order to save money over time.

No worries, there is nothing wrong with being resourceful. In fact, it seems we could use a bit more of that in our wasteful world. When we first started using pipe screens, we had no idea how to clean them, and had to try all sorts of methods before getting the process just right. So, we thought we would save you some time and share this little secret with you.

What Supplies Will I Need?

To clean your pipe screen, you should prepare the following supplies:

  • Lighter
  • Salt
  • Isopropyl Alcohol
  • Tweezers
  • Water
  • Container
  • Gloves
  • Paper Towels

Once you have all of these supplies ready, it is time to start cleaning your pipe screen!

How to Clean a Pipe Screen in 7 Steps
  1. Check the pipe screen for dirtiness – Take out your screen and check out how dirty it is. Sometimes, a loose layer of ash will be responsible for how dirty it is, other times a layer of resin buildup is the culprit. Depending on how dirty it is, you may have to take different steps to clean it.
  2. Blow on the screen – To reveal how dirty your pipe screen truly is, blow on it to remove the top layer of ashes. If it seems like that is all you needed, you may be able to skip the remaining steps of the cleaning process, but can still follow through to ensure cleanliness. If there seems to be resin built up, it is definitely time to take the next steps.
  3. Burn your pipe screen clean – Next, take your tweezers and lighter. Holding your pipe screen in your tweezers over your sink or toilet, use the lighter to heat it up for about 1-2 minutes. Any longer can damage the durability and integrity of your screen. This step helps to burn off some of the resin that remains on your screen after blowing it.
  4. Let your screen cool and blow on it again – After heating it, let your pipe screen cool about 2-3 minutes before picking it up again. Blow on it once more to assess how clean it is. If no resin remains, simply soak it in warm water for 30 seconds to remove any residue from burning it and let it dry. If resin remains, continue on to the next steps.
  5. Soak your pipe screen in an alcohol and salt solution – Take your Isopropyl alcohol and pour it into your container. For small pipe screens, you will not need more than about 8 ounces. Then, take about 2-4 tablespoons of salt and mix it in until you have a solution. Then, place your pipe screen in the solution and let it soak for about 30-60 minutes.
  6. Take your pipe screen out and rinse it – After you have let it soak for about an hour, take out your screen and check to see how clean it is. If it looks clean, then simply rinse it off with clean water, and let it dry before using it again. If it still seems dirty, you may need to let it soak once more.
  7. Be sure to rinse and dry your screen – This is one of the most important steps in the cleaning process. You want to make sure that you rinse all of the alcohol solution off of your pipe screen before using it, otherwise, you will expose yourself to dangerous alcohol fumes. Also, be sure to dry your screen before using it in order to keep your herbs dry.

And that’s it! Now it’s time to smoke again and get your pipe screen dirty again! Be sure to keep an eye on the durability of brass and stainless steel screens every time you clean them. If they seem to be getting weak, just throw them away instead of waiting for them to crumble while you are smoking.

3 Things to Keep in Mind When Cleaning Your Pipe Screen

When cleaning your pipe screen, it is important to remember a few key things:

  1. They only last so long – Look, I don’t care if you are the Greek God of cleaning, you can only use a brass or stainless steel screen so many times before it is just dangerous to smoke out of. If it gets to the point where it feels very weak, you should throw it away and not risk smoking out of a pipe screen that could fall apart, causing you to inhale dangerous fumes.
  2. A clean screen is more efficient – What’s the point of using a pipe screen if you can’t even get a smooth smoking experience out of it? Without cleaning your pipe screens, you are either wasting a lot of money purchasing new ones, or wasting a lot of time having to clean your hand pipe more often.
  3. Some screens should be cleaned before use – Believe it or not, some pipe screens come with a dangerous chemical film on the outside that needs to be burned off before using. Be sure to check your labels before using your pipe screens in order to be sure they are safe to smoke. Or ditch the safety problems altogether and opt for a glass pipe screen.

How Can I Make a Pipe Screen at Home?

Look, there are all sorts of ways you can make a pipe screen at home, from using tin foil to a paperclip. However, we do not recommend any of these methods for a few major reasons:

  • They expose you to harmful chemicals and fumes
  • They are hardly cheaper than purchasing real pipe screens
  • They never work that well
  • They don’t last more than a few smoking sessions at best

Overall, for the benefit of your own safety and time, you are better off just purchasing a glass pipe screen that fits just about any hand pipe or bowl, and keeping it nice. This will help you save a lot of money, and dramatically reduce your exposure to additional carcinogens in whatever you are smoking.

Wrapping it Up – Should I Use a Pipe Screen?

Yes. In our experience, using a pipe screen makes for a smoother smoking experience every time. They are very affordable, easy to clean, and usually last a very long time if you treat them right.

We always suggest you use glass pipe screens for safety purposes primarily, but also to get a better taste, and have a longer lasting, easier to clean pipe screen in the future.

Want to Learn Even More Stoner Tricks?

At HelpingPot, we pride ourselves on being one of the premier educational resources for the Stoner Community. If you are looking to learn about just about anything in this industry, we are your resource. Check out some of the categories below for more awesome content from our blog.

Cleaning Guides
  • How to Clean Your Bong
  • How to Clean Your Grinder
  • How to Clean Your Hand Pipe
Best Stoner Gear 2019
  • 10 Best Dab Rig Accessories 2019
  • 10 Best Bong Accessories 2019
  • 10 Best Travel Pipes
  • 13 Top Torches for Dabbing
  • 10 Best Grinders of 2019

You can also follow us on Instagram to tune in for original Stoners content, dank deals, and more! Or check out our online headshop for great deals on some amazing gear!

Pipe screens are one of the best things you can do to make your smoking experience smoother. In this guide, we break down how to use them, why you should, and where to find the best pipe screens.

kava plant seeds

  • Post author

By Admin
Post date

Life Cycle of a Kava Plant

Field of Hiva Kava Plants

Have you ever wondered how a Kava plant grows from a tiny seed all the way to a mature, flowering plant? Well, you are in luck because this informative article covers every stage of the life cycle. From a tiny shoot, to taking cuttings, to growing a mature flowering Kava plant that’s ready for harvest; we’ll cover it all.

So, my first fun fact about Kava plants is that they went sterile a long, long time ago. That means they no longer produce seeds, no matter how many insects (or humans) try to pollenate their oddly beautiful flowers. All Kava propagates the next generation through cuttings. Various methods have been tried by Kava farmers all over the world. In my 20+ years of working with Kava plants, I’ve tried every method I could get my hands on. For me, though, the best way I’ve found to propagate new cuttings, is by placing them horizontally in some rich soil. Kava mostly grows on islands in topical areas, and islands almost all arose from volcanoes. This means rich, sandy soil. take a look at this second photo:

New Juvenile Kava Plant

Notice how a short section of a Kava stem has been submerged about halfway into the rich, volcanic soil. The soil can be kept fairly moist, and needs to be kept out of direct sunlight. Believe it or not, despite Kava plants thriving in tropical climates, they prefer about 30% shade throughout their life cycle, and even more shade when they’re just babies.

Now it may have occurred to you to ask about that section of Kava. How do you know what section to take in order to make a new cutting? Well, that’s the easy part. Kava stems look a lot like bamboo, just knobbier. So, as a plant grows, the stem gets a bunch of very noticeable nodes as it goes. Depending on the variety, some plants may get really crooked with very short internodal lengths, and others may have long internodal lengths and remain quite straight throughout their life. Take a look at this photo, which shows the nodes of a Kava stem:

Kava Plant Nodes

This variety is called “Mo’a” and it tends to have shorter internodal lengths, and can get quite knobby. Notice how the nodes are darker at the nodal point, and how it gets greener along the stem. This is one of the main ways of discerning different varieties of Kava. (If you look to the right, you can see the stem cutting that this plant is growing out of.) The plants take on these colorings very early on, but the colors can get much more intense as the plant matures.

Every cutting needs at least one node in order to produce a new plant, but I have found that at least 2 nodes are ideal. With two nodes on the cutting, what happens is one node will take on rooting, while the other node will sprout shoots. This isn’t a hard and fast rule, but if I’m not working from just a few cuttings, and can afford to have each of them have 2 nodes, that seems to work out the best.

Take a look at the following photo; this shows a cutting that just a month old. This one was started from a very short node, and was placed into a well-drained box with just a few inches of soil. The box was then kept fairly wet, watered every day, and placed in partial sun. These plants were started on the Big Island of Hawaii, so the soil was taken directly from the ground.

This is a very happy and healthy Kava plant! Already, you can see its variety by its markings on the stem. It’s difficult to see from here, but this is a Nene variety of Kava. This Hawaiian cultivar is known for it’s mild flavor, and it’s lighter Kavalactone content.

Also notice that this cutting only has a single node on it. Since the stem was placed in the soil horizontally, the roots and the shoot grew from the same place. If you instead choose to plant it vertically, two nodes are almost required. Look at the following photo. See how these Kava shoots look in comparison. They were planted in the same soil, but with plenty of Perlite mixed in, and were placed horizontally instead.

New Vertical Kava Plant

The other common propagation method is to plant the stems vertically. This seems to

New Tall Vertical Kava Plant

work best when the Kava plants are mature, and the stem length is at least several inches. Take a look at this baby on the left, as well as this more mature plant on the right. Both are Nene cultivars, and are from plants that are about 7 years old.

The one on the left was planted in an aeroponics cloner that uses intermittent sprays of water. This tends to make amazingly beautiful root bundles that transfer well to rich soil. If you choose this route of Kava propagation, make sure that the soil is very well drained, has plenty of Perlite or similar aerating medium, and plan to have a number of your new plants die off. The ones that survive, though, will make great Mother Plants for future generations of Kava.

The one on the right, if you look closely, has a tiny shoot just under my pinkie finger. This is where the new plant will sprout from, and the rest of the stem that I have in my hand will darken and dry out. They stay attached to the new plant though, as you can see in the picture of the Mo’a above. If this happens and you don’t like the dead stem sitting there, it IS safe to cut it anywhere above the new Kava stem that sprouted.

New Kava Cutting

Here is one more example of a vertical planting of a new Kava plant. This was stuck directly in rich, well-drained soil, about 1″-2″ below the soil line. The node is left above the soil line to allow the new shoot to take hold. This one isn’t as happy as the others, as some of the new leaves died off, and new shoots began to sprout. I’ll let you know the fate of this plant.

As the Kava plants takes hold, there will likely be a sudden burst of new shoots emerging from each of the nodes. And, in many

Emerging Kava Leaf

instances, new shoots will emerge from those new shoots. Depending on the type of Kava plant you planted, longer internodal stem lengths will typically produce plants with long leaf stems as well, often getting so heavy that they will droop to the ground.

Here’s a great example of that on your right. An already established stem had a burst of new stems emerging from them. In fact, this particular Kava plant has stems and leaves coming from seemingly everywhere. Look closely, and you can see how the new leaf develops inside the stem of the existing leaf. The stem splits, and like a chicken from an egg, the new leaf works to break free, and then unfurl. You can see the same process in the photo below.

Kava Leaf and Flower

Next up are flowers. There’s really no need to spend a lot of time on this because flowers are quite irrelevant to the Kava plant. They’re other-worldy rather than pretty, they don’t have much of a scent to them, and they won’t produce seeds no matter how hard you try.

How the flowers emerge, though is quite interesting. When they first begin, they seem to have been “stuck” onto the plant, as if a Kava Elf came along in the middle of the night and pasted a bunch of Kava flowers in odd places. They start off really skinny, and always appear at the emergence point of Kava leaves. In this not-so-rare photo, it’s flowering just as a new leaf is emerging. The flowering cycle is also difficult to predict. This flower began around July. It’s the peak of summer, and this particular 6 month old plant flowered like crazy.

Does Kava Flower?

The flower keeps growing outward, staying quite slim, making more of a stick than a flower. Take a look at the image on the left. This is a flower in adolescence. This is another few weeks in, as the flowering cycle for Kava lasts a few months. I’ve tried everything I could think of (I know it’s in vain, but it was fun to try), to try to get seeds from a Kava plant, but it’s no different than trying to get water from a stone.

Usually, in flowering cycles, plants stop producing leaves, but not Kava. Throughout the flowering cycle, leaves continue to grow at an amazing pace. Before you know it, the flowers reach maturity, stick around for a while, and just die off.

I haven’t seen more than one flowering cycle per year, but the time of the cycle isn’t

Mature Kava Flower

always predictable. It often seems to depend on when I take cuttings, when they take root, and where in the various places I keep my Kava plants they are.

Lateral Kava Roots

There are many choices for the first two years of your Kava plant’s life. As excited as you might be to have home-harvested Kava roots, it takes a minimum of two years for them to mature. Growing Kava plants is definitely an exercise in patience, and on many levels. There will probably be many times you will want to cut off a few roots to sample them, perhaps to make yourself and a friend a shell of Kava. But, the Kavalactone content, like a fine wine, takes time to materialize and develop. Two years is actually the minimum time for a plant to mature; a much better time (that will likely yield a higher Kavalactone content and a smoother taste) is four to five years. We try to harvest all of our roots at a minimum of 5 years of age.

During that growing cycle, there are many options for your Kava plant. What are most prized are what are called “lateral” roots. Those are the roots that grow along the ground. And, there are many ways to encourage the growth of those lateral roots. This part of the Kava plant is always seeking oxygen. One of the best ways to accomplish lateral growth is to have your Kava plant suspended slightly above the ground, or to have the main bundle of your Kava plant in a closed container. A closed container will keep out some air and as much light as possible.

You might initially think that a standard flower pot might do the trick, but that’s the catch; you’ve got to have a place for those lateral roots to go. So, one of the best containers we’ve found is a burlap sack. Just as we’re transplanting our new Kava plants, we fill half of a burlap sack with rich, well-aerated soil. Then, we place the baby Kava plant at the top, and cover it with an inch or two of soil. We take the rest of the burlap sack, and tie it very loosely around the stem of the plant. You can then simply place that plant and sack on the ground. (I usually dig out a very shallow hole for the sack to rest in.)

This allows you to water, but also allows for increased drainage. And then, as roots grow out and reach the edge of the burlap sack, they will poke through looking for both oxygen and Earth. They’re smart enough (or at least gravity helps them to be smart enough) to reach out from the sack and stretch towards the Earth. From my experience, these lateral roots also tend to grow extra thick, increasing the harvest of lateral roots, and giving you even more prized Kava than you may have had if you planted it directly into the soil.

This is where growing Kava plants turns into science if you’re interested in maximizing your root harvest.

Finally. You’ve started your plants from cuttings, you’ve seen them at least through two years of growth, and finally want to harvest some

Kava Harvest Time

kava roots. It is possible to save your Kava plant when you harvest, but no matter what method you chose at the start, you’ll only get a good amount of Kava if you sacrifice the plant.

The good news is that during that two year wait, you probably got really good at rooting new cuttings. Your plants sprang up to at least six feet tall, and you took many different cuttings, and made lots of new plants. We space planting about one year apart, so there is a continual supply of Kava year after year. Once Kava takes hold and is happy, it grows like crazy, and will last many years.

So, take a look at the image to the right. This is a mature Kava plant, about 5 years old. This is the part of the stump just above the ground, where there are a lot of lateral roots. Look at all the stems coming of off this stump to the right — those are the prized lateral Kava roots, although the chips that you get from the stump can often make for smoother drinking Kava.

Kava Root Stump

The stump itself can get quite large. I’ve included the image on the left to give you a good idea of the size of the stump. Now for the bad news; Kava contains about 80% water. That means that if you harvest 100 lbs of root, you will only end up with about 20 lbs of dried root material. In the recent marketplace, with the explosion of Kava bars throughout Oceania, this little fact is causing a shortage of Kava. Growers get a lot more money for “green” Kava roots, which are non-dried, fresh Kava roots.

Drying your Kava roots can also take some time. Kavalactones start to break down at just 140 degrees Fahrenheit, so you can’t just place your newly-harvested Kava roots into an oven to dry . Typically the roots are dried in large enclosed shaded structures, with exhaust fans and often dehumidifiers. This allows for plenty of airflow, while providing enough heat to dry the roots. Roots can take quite some time to properly dry as well.

Kava roots are like sponges, and will absorb any moisture in the surrounding environment. What this means is that they are also susceptible to mold and fungus. Roots must constantly be rotated, not allowing any to stay in one position for too long.

Kava is definitely a plant of patience. I think it’s one of the most Zen plants there are, as every step of the process requires repetition and patience on many levels. We have to initially wait at least two years for our prize, so if you’re are someone who feeds on instant gratification, growing Kava might not be for you. But the prize, when it arrives is one of the sweetest I’ve ever known.

Settling in with a shell of Kava that you’ve grown yourself is a joy like few others. And I don’t doubt for one second that it’s my own bias, but I’ve never grown sweeter, better drinking Kava root than the ones I’ve planted, grown, and harvested myself in my own Private Reserve garden in the great outdoors.

Buy Some Kava Roots!

Find only Noble Roots in the Kava Marketplace. Whether you like instant drinks, capsules, Kava root powder, or Kavalactone Paste, you’ll find something to suit your taste buds. Become a Kava fan today!

This informative article discusses the life cycle of a Kava plant, and also gives you great tips on growing kava plants as well. Click here to read it.

CANNABISCLINICMONTANA.COM northern auto Post author By Admin Post date Northern Automotive Systems Ltd Northern Automotive Systems is a world leader in the manufacture