Prevention and Treatment of Powdery Mildew
Powdery mildew is one of the most widespread plant pests. It tends to affect flowering plants and fruit trees or bushes (roses, apple trees, etc.) as well as cannabis. The spores are in the air or on contaminated plants in the garden and can easily be drawn into your grow room by ventilators. In internet forums and cannabis cultivation books you may find lengthy lists of possible treatments that look temptingly promising for a complete recovery at all stages of mildew infestation. But the authors have rarely tested these products themselves, and the compounds are seldom differentiated between those applicable only for growth, and those also safe to use during flowering. This guide is therefore specifically orientated towards publishing some first-hand experiences with a variety of fungicides, and a review on the specific utilisation of products during growth and flowering in cannabis plants.
In warm, dry climate powdery mildew spreads widely. But we have also observed heavy infestations particularly after a long and wet winter. The symptoms even disappeared occasionally during a heat wave. It is therefore unlikely that powdery mildew only affects cannabis plants during a warm and dry weather period.
Powdery mildew can be detected by the white-coating on leaves and shoot tips, which succumb to the infestation by atrophy and eventually die. Only the surface of the leaves is contaminated by the fungus. Very heavily infested plants often cannot be saved. Plants affected by this disease and wilting plants should be removed from the garden if you don’t want the spores to spread. If the infestation of powdery mildew arises during the last few weeks of flowering it is possible to control an infestation until harvest. A good fungicide can fully combat powdery mildew, but the treatment is often lengthy and takes several weeks. Mother plants and cuttings should be treated preventively so that valuable genetics are not lost.
Mildew is a surprisingly aggressive fungus taking second place only to bud/grey mold (Botrytis). If you not only require a fungicide for preventive means, but also to combat an infestation, you may need to alternate between several products for the total period of treatment. In the instructions for use it is stated how often a specific compound can be applied per crop. Since fungicides allowed in organic agriculture can be less effective than synthetic products, all preventative management measures to reduce the primary infestation and to improve the microclimate should be exploited optimally. Fungicides are applied at the crucial stages in the development of the plant and the epidemic. Specific traits of the products must be taken into account for outdoor applications (such as rain fastness and hazards to plant health under intense heat or sunlight).
Photo 1: The first signs of powdery mildew are small circular white spots.
Photo 2: As the infection progresses the mildew becomes more visible and covers the leaf surface.
Photo 3: Powdery mildew can spread very quickly; older leaves start to yellow and wilt.
Photo 4: A heavy infestation can be difficult to contain. The mildew covers all plant parts and weakens plant defences.
Photo 5: Organic residues that cover leaves, such as pollen from seeded buds, easily attracts powdery mildew. The sticky secretions from aphids or white flies have a similar effect. The moldy residues eventually turn brownish-grey with age and can develop black spots.
To begin with, it’s important to distinguish the criteria according to which fungicides for organic produce intended for human consumption should be purchased. These criteria ensure not only safety measures for humans, but also for the environment: such as for beneficial insects, animals, and aquatic life. Secondly, the fungicide must be safe to use on a soft-leafed plant species such as cannabis and flowering plants in general (if required for the flowering period). Therefore, the first step when purchasing a fungicide is to check the product information on potential hazards for specific plant species or flowering plants, human consumption, and the environment.
Avoid this sign when purchasing a fungicide!
A fungicide should be purchased according to the following criteria:
- good plant tolerance
- not harmful to flowering buds
- effectiveness for medium to heavy infestation
- effectiveness as a preventive product
- not toxic for humans
- environmentally friendly (pets, water sources, honey bees, etc.)
Fungicides to avoid:
- synthetic fungicides and all other products not suitable for agricultural crops
- fungicides that will desiccate the leaves or flowers such as horticultural oils and salts
Funigicide that did not work in our tests:
Photo: This plant has been treated with sulphur. Sulphur has many disadvantages: it emits a horrible smell, treated plant parts and buds are unfit for human consumption, it cannot be washed off, and the white coating makes it impossible to discern the sulphur from the mildew (so you can’t tell long-term how well the treatment has contained the infestation).
Enhancing Plant Defences
With less new fungicides coming on the market due to environmental concerns, more scientific effort is now being put into the use of the genetic potential of plants for pathogen resistance. In addition, scientists are focusing on exploring the development of induced or acquired resistance as an environmentally safe means of disease control. In our breeding projects at Mandala Seeds the immune system and resistance of a strain has always belonged to one of the high priorities. In the OUTDOOR GUIDE of our website you can also check which Mandala strains have been tested for mildew resistance and this helps in selecting the appropriate strain for your region.
We use several methods to ensure plant resistance is maintained or optimally enhanced in the Mandala strains:
- large-scale and strict selection of plants in parental lines
- reinforcement with specific genetic strengths of landrace varieties
- creating varieties with a heterosis effect so that they have vitality, stronger plant tissue, and increased defences (i.e. resistance against pests, temperature fluctuations, wind, light stress, etc.)
- breeding under intense grow conditions that enforce the survival capabilities of the plants
- methods of plant care with the objective of supporting systemic acquired resistance (SAR), which is a “whole-plant” resistance response that occurs following an earlier localized exposure to pathogens
Introducing Effective Fungicides
We have tested several products available on the market in Europe as well as easy to use home-based recipes. One of the most promising are lecithin-based products. Commercial products based on lecithin have become very useful tools in powdery mildew control in central Europe since the product does not cause any off-flavours. It is also harmless to fragile young plants and, most importantly, to flowering marijuana buds.
In North America the ECO SMART Garden Fungicide is one such product: www.ecosmart.com
NEUDORFF Neudo-Vital was developed using the concept of “induced resistance” as a pesticidal strategy. Plants release a range of volatile organic compounds in response to pests and pathogens and some of these compounds have been used to induce a resistance response in laboratory tests. A number of plant extracts have been shown to possess such activity. Neudo-Vital is based on three naturally occurring fatty acids and ethanolic plant extracts. There are two versions, one for roses and one for fruit trees and berries. Both will work for cannabis plants during all stages of growth and flowering. The product is available online and in Germany, Austria, Switzerland, Spain, France, Italy, Czech Republic, etc.
Is milk the answer?
In an outdoor garden we have also found a diluted milk solution effective during vegetative growth when combined with other products. The idea to use milk as a biological fungicide came from the Brazilian scientist Wagner Bettiol. He experimented with different mixes of fresh milk in order to combat powdery mildew on greenhouse zucchinis and published his findings in 1999. The Australian scientist Peter Crisp from the University of Adelaide tested this method among 40 different alternative methods to combat mildew on grapevines. He discovered that milk or whey showed the best results. The microorganisms in the milk combat the mildew. In addition, the natrium phosphate strengthens plant defences. Diluted milk has been reported as surprisingly efficient in the agricultural sector in Australia, but under central European conditions it is used only rarely on cultivars due to the poorer weather conditions. There is, of course, a big difference between zucchini, grapevines, and cannabis plants. No matter how promising such results look like, they must always be seen in the context of which cultivars require treatment. Since milk contains proteins and sugars, infection by grey mold (Botrytis) may be promoted after treatment . That poses a serious risk to flowering marijuana. For this reason it is only recommended to treat cannabis plants with a diluted milk solution during growth and preflowering.
For maximal effectiveness the treatments should be alternated weekly with another fungicide. Mix milk and water in parts of 1:9. Spray the plant thoroughly on a sunny day. If no other fungicides are available apply 1-2x weekly.
Extract of Giant Knotweed (Reynoutria sachalinensis)
Knotweed extract induces phytoalexins which infer resistance to powdery mildew and other diseases such as Botrytis. In other words, the extract helps the plant fight the mold rather than attacking the mold directly. We have not tested knotweed products yet and therefore the information presented here is only based upon scientific studies on a variety of other plant species. However, these results do indicate promising effectiveness for cannabis too since a large variety of cultivars respond favourably to the treatment.
There are two primary products on the market: Milsana® and Regalia®. Milsana® is available in Europe. The technical grade active ingredient (TGAI) consists entirely of the dried and ground plant material from harvested Giant knotweed plants grown for this purpose. The end-use product Milsana® is classified as a “Bioprotectant concentrate”. It contains 5% of the ethanolic extract of Reynoutria sachalinensis. Milsana® is recommended as a spray on greenhouse grown plants for the purpose of boosting their natural defence mechanisms against certain fungal diseases. The product should be used as a preventive application mainly for the control of powdery mildew and is used for vegetable and fruit plants in Europe for outdoor/greenhouse cultures. No unreasonable adverse effects on humans or the environment are anticipated from exposure to Milsana®.
According to several studies plants such as cucumber, tomato, salad, potted herbs, and strawberries treated with Milsana® were significantly less infected than controls and this protective effect against powdery mildew was maintained over time. When topically applied to various ornamental, vegetable and fruit crops, this product will induce increased amounts of naturally occurring phenolic substances within the plant, which prevent the attack of plant diseases such as powdery mildew and grey mold (Source: Physiological and Molecular Plant Pathology – Volume 61, Issue 2, August 2002, Pages 121-132) . On ornamentals and strawberries it is also effective against Botrytis or grey mold. It remains to be seen if it has the same effectiveness for marijuana.
Available in Europe at www.biohelp.at and www.biofa-profi.de
Regalia® is also a patented formulation of an extract from the Giant knotweed plant and sold in the USA. Regalia’s unique mode of action switches on the plant’s natural defence mechanisms to inhibit the development of major diseases, including powdery mildew and grey mold. Research shows after treating with Regalia®, plants produce and accumulate elevated levels of specialized proteins and other compounds known to greatly inhibit fungal development. For example, Regalia® will induce a plant to produce cell strengtheners, antioxidants, phenolics, and PR proteins, which are known to fight pathogens that infect plants. Additionally, Regalia® causes an increase in the production of phytoalexins, the “antibiotics” produced by a plant under attack. These act as toxins to the pathogen such as mildew. More info under www.marronebioinnovations.com
Baking soda has been one of the basic fungicides in use to compbat powdery mildew but it has disadvatanges too. A much more effective product is GreenCure® – a potassium bicarbonate-based fungicide that has been proven to cure and prevent powdery mildew, fusarium, and many other fungal infections. GreenCure® is being used with success by growers in the USA but there are a couple of restrictions for applying it on cannabis that need to be considered. Potassium Bicarbonate is a naturally occurring compound that is widely used in food and is an integral part of humans, animals, plants and virtually all living organisms. It is environmentally friendly and recommended for use on over 150 different flowers, trees, fruits and vegetables. It can be used in organic vegetable production and even indoors. It was found that potassium bicarbonate is 25- 35% more effective than sodium bicarbonate (baking soda). In addition, an effective “spreader-sticker” was needed to evenly spread and stick the potassium bicarbonate over a leaf surface to give it the ability to be a powerful fungicide and have lasting and preventative characteristics.
GreenCure® can be used as a good preventative control of powdery mildews by applying 1 tablespoon per gallon of water every 1 to 2 weeks when environmental conditions are ideal for the disease. In cases of moderate to severe infestation GreenCure® can be used to eradicate plant disease by spraying plants completely with a mixture of up to 2 tablespoons of GreenCure® per gallon of water weekly for 3 weeks followed by the preventative program thereafter. GreenCure® kills mold/mildew spores within seconds of contact by causing an immediate dehydration of the spores and destruction of the cell walls. In a greenhouse it is important to spray at times when the sun is not shining as this can cause burning on recently sprayed, wet leaves. For indoor gardens with high intensity lighting it is best to turn lights off after spraying in order to let GreenCure® air dry to avoid burning from hot, intense lighting. Infected plants should ideally be moved to a separate and shadier area after treatment. Lamps can also be hung further up for a few days as an alternative. Potassium bicarbonate is not suitable for treating seedlings and should not be sprayed directly on flowering buds. Therefore, you have to treat leaves carefully with a hand-held spray pump and avoid contact with the buds. Treated leaves should not be smoked . More info under: www.greencure.net
Garlic is cheap and readily available. This has made it a favourite “home-grown” pest control, especially among organic gardeners. The volatile antimicrobial substance allicin (diallylthiosulphinate) is produced in garlic when the tissues are damaged during crushing or chopping the garlic. Allicin in garlic juice inhibits the germination of sporangia (in which the spores develop) and thereby acts as a fungicide. You can buy readymade garlic extracts that are very effective in three ways: as a natural insect repellent, as a fungicide, and plant strengthener. Alternatively, you can make your own juice by using a homemade recipe. Garlic extracts are not suitable for seedlings and should not be applied under direct sunlight.
Garlic GP Ornamental Fungicide is a commercial product available in North America.
To conclude, it’s important to note that plant-pathogen interactions are a rapidly developing area among the plant sciences. There are constantly new results being published on this subject. Here a few promising selections of products in ongoing research studies that are easy to purchase:
- Silicon : increases plant resistance to pathogenic fungi possibly through an interaction with defence responses. Silicic acid may play a role in systemic resistance. Several organic products are available containing soluble silica such as Humisolve (more info at www.bioag.com), or you can make your own homebrew fertilizer with nettles to treat outdoor plants during growth.
- Vitamin B1 : induces SAR when applied to vegetable crops and increased resistance to fungal, bacterial and viral infections.
- Riboflavin or Vitamin B2 : induces systemic resistance on tobacco and could perhaps work with cannabis too.
For ensuring plant health any preventive measures can be extremely important. Obviously, it is much better to prevent an infestation from the start – especially when the disease is so aggressive and easily transmitted from plant to plant. These recommendations are based on practical gardening experience from our expert breeders.
- choose cannabis strains with a high resistance if you live in an area prone to mildew infestation
- ensure a good climate in the greenhouse and indoor (ventilation, electric or gas heating required)
- avoid the use of nitrogen-rich manure (like fresh manure or unripe compost), avoid fertilizers high in ammoniacal nitrogen such as pure guano in powder and pellet form
- prevent white fly and aphid infestations and treat plants thoroughly if diseased, the sticky secretions from these pests cover the leaves and facilitate mildew which in some cases turns greyish-black
- do not grow too close to damp areas (riverside, etc.)
- increase the light intensity indoor if you are growing under low-light (such as CFL, fluorescents, LED lamps, etc.)
- use garlic teas and garlic sprays
- treat plants regularly with lecithin-based sprays
- remove or treat all infested weeds and ornamental plants on your property; cut away infested twigs on fruit trees at the earliest signs of infestation
- spray down leaves with clean, chlorine-free water if they are covered in pollen after pollinating buds for seeds (wait a few days after pollination is completed), stale pollen residues easily turn moldy under high humidity and attract mildew
Tips for treating mildew
- keep enough distance between plants to prevent overcrowding
- use nitrogen rich fertilizer only sparingly and when absolutely necessary
- separate or isolate infested plants from healthy ones
- start treatments on time and repeat them regularly
- switch compounds so that no resistance occurs (follow product instructions!)
- preventive treatment is important for high risk areas (especially on mother plants, cuttings, young plants)
- do not spray outdoor plants during strong sunshine; apply fungicides indoors shortly before the dark period
- when using a new or innovative product do a test on one or more plants first to check if the product is plant friendly – this is especially important during flowering to avoid unnecessary damage to the pistils, and for young plants with their tender leaves
Infected leaves or buds should not be smoked or used for cooking!
Mandala Seeds shall not be responsible for the use of any information herein presented and you must make your own decision as to its suitability and completeness for your use. We are not responsible for the use of a product mentioned and any effects or consequences it may have on your cultivation.
© All rights reserved, Mandala Seeds Ltd. 2020.
The complete design of this web site and all its contents and single components such as images, logo, text, etc. belong to Mandala Seeds. No unauthorized copying, distribution, hiring and/or lending of our web pages or their contents is permitted without our written consent.
Prevention and treatment of powdery mildew on cannabis and marijuana. Mandala Seeds ensure plant resistance is maintained or optimally enhanced
Powdery Mildew on Cannabis (How to Cure Organically)
Apr 2, 2018 · 3 min read
Powdery Mildew on Cannabis
The fungal disease known as powdery mildew affects a range of cannabis strains. This species of fungi in the order Erysiphales, grows quick on leaves and has become an Apocalypse of fear for the bud grower.
Powdery mildew has taken over vasts tracks of land throughout the world, growing especially in mild-warm climate environments like Hawaii, Florida and other Southern USA areas.
Whether you actually grow organic or not, when it comes to spraying stuff on your buds, chemical treatment should never be a consideration.
What to do about Powdery Mildew on Weed
Wet moist condi t ions coupled with disease and infections could harm the blooming procedure of lots of varieties of plants, including marijuana. The best decision is to try and stop powdery mildew at first sight.
To kill powdery mildew you either need more than 16 hours of 90° F heat, or a working fungicide.
However, cannabis is usually grown for human consumption, so using chemical fungicides is not a safe option.
How to cure powdery mildew organically?
- 1 teaspoon Baking Soda (Sodium Bicarbonate) in a cup of water.
- 1 teaspoon Potassium Bicarbonate
- 1 teaspoon
- A few drops of hydrogen peroxide in a cup of water.
- 1 teaspoon Neem Oil in a cup of water.
- 1 teaspoon Apple Cider Vinegar in a cup of water.
- Recommended dosage of organic live agents (Actinovate, ect.)
There are also mixed organic remedies made specifically for cannabis like this: https://moldresistantstrains.com/6-ways-cure-powdery-mildew-cannabis-organically/ these can be foliar splashed, and will minimize fine-grained mildew on marijuana dramatically. Be sure to clean plants extensively as well as examine for future troubles diseases.
Organic remedies for powder mold are the best option by far. Don’t panic — go organic.
When buying powdery mildew remedies online
When seeking to buy a powdery mildew or plant disease treatment, see to it to purchase the most affordable cost on high quality items.
Use respected brand names with plenty of real item testimonials. Star rankings are a plus and also real looking reviews. Some lower quality websites pay for evaluations or make them up themselves.
Additional Information about Powdery Midew
- Bleach is your friend, use it to clean walls and other surfaces where the fungi may lie.
- Watch out for not just powdery mildew on marijuana but also botrytis grey bud mold and mildew, bud rot, white colored powder fungus, powder mildew.
- These illnesses could inhibit the flowering process of several selections of plant life, including marijuana, cannabis, different natural herbs and also other yearly plants in the backyard.
- Organic cures should be foliar sprayed, in addition to will certainly cut down on powdery mildew mold considerably.
- Make sure to clean vegetation extensively as well as examine for potential problems & diseases.
- Remove any infected leaf matter and dispose of it accordingly.
Eliminating powdery mildew is not the easiest thing in the world to do, but with some patience and possible repeated application of the cure the grower may find success.
The fungal disease known as powdery mildew affects a range of cannabis strains. This species of fungi in the order Erysiphales, grows quick on leaves and has become an Apocalypse of fear for the bud…